26electrolux
Important safety requirements
Installation
The following instructions about in- stallation and maintenance are meant for a qualified installer, in order that the op- erations of installation, regulation, and service are executed according to the existing regulations.
Whenever changes are mode involv- ing the disconnection of the appliance it is necessary to proceed with maximum caution.
THE MANUFACTURING COM- PANY DECLINES ANY RESPONSABILITY FOR POS- SIBLE DAMAGES RESULTING FROM AN INSTALLATION WHICH DOES NOT COMPLY WITH THE RULES IN FORCE.
to gas combustion can naturally flow in the room. (The installer must follow the rules in force).
The air flow into the room must come directly through openings of external walls. These openings (or opening) should be realized in such a way not to be occluded both from inside and out- side.
Installation and maintenance must be carried out by a qualified technician, in compliance with rules in force.
The electric coonection must be car- ried out in compliance rules in force.
Our responsability will not be in- volved in case of accidents caused by a defective or non existent earth connection.
Provision for ventilation
This appliance is not connected to a combustion products evacuation device. It shall be installed and connected in accordance with the current installation regulations. Particular attention shall be given to the relevant requirements re- garding ventilation.
The use of a gas cooking appliance results in the production of heat and moisture in the room in which it is in- stalled. Ensure that the kitchen is well ventilated: keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood).
Installation environnement
Warning - This unit can be installed and can work only in constantly venti- lated rooms, according to rules in force.
In order to make the gas unit work properly, it is necessary that air sufficient