Electrolux D77000GF Connecting to GAS Supply, Fitting the Stability Chain, Pressure Testing

Page 42

CONNECTING TO GAS SUPPLY

This appliance is designed to be installed with an appliance flexible connection only. Supply piping should not be less than R3/8. Connection is made to the Rc ½ (½” B.S.P.) female threaded entry pipe located just below the hotplate level on the rear left hand side of the appliance. NOTE: ONLY LIQUID

SEALANTS TO BE USED WHEN INLET GAS PIPE IS FITTED I.E.: DO NOT USE P.T.F.E. SEALANT TAPE. Carry out a gas tightness test after connecting to the gas supply. The gas bayonet connector must be fitted in the shaded area indicated in Fig.4. Take into account that it must be possible to pull the appliance forward sufficiently. Ensure the hose does not become trapped when pushing the appliance into position.

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS.669 CURRENT EDITION.

FITTING THE STABILITY CHAIN

It is recommended that if the appliance is to be installed with a flexible supply pipe, a stability chain be fitted and is available from your supplier (see Important Safety Requirements). These instructions should be read in conjunction with any leaflet packed with the stability chain.

1.Place the appliance in its intended position and level appliance.

2.Mark a position 100mm from the top of the rear right hand corner.

3.Measure down 150mm from this point. This gives the position of the wall anchor point for the stability chain.

4.The stability chain anchor point on the appliance is shown in the diagram Fig. 5.

PRESSURE TESTING

1.The Triple crown injector is used as a pressure test point.

2.Connect the pressure gauge to the Triple crown injector.

3.Check the supply pressure by turning the Triple crown burner on and one other hotplate burner full on and light the appropriate burner. The pressure should be 20mbar

4.Turn off the taps, disconnect the pressure gauge.

5.Check operation of each hotplate burner.

Fig.4.

Fig.5.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents D77000GF Child Safety Important Safety InformationInstallation Cleaning and MaintenanceContents Description of the Appliance SLIP-IN Duel Fuel Multifunction Double OvenFeatures Getting to Know Your ApplianceControl Panel Before Using the Appliance Timer HOW to SET the Time of DAYHOW to SET the Countdown To Cancel the Countdown Setting the Oven Timer ControlTo SET the Timer to Switch on and OFF Automatically To Return the Appliance to Manual To SET the Timer to Switch OFF onlyTo Cancel AN Automatic Programme Things to NoteTo Light the HOB Burners Using the HOBHOB To Turn OFF ANY BurnerHints and Tips Using the Grill GrillGrill PAN and Handle Position Grilling ChartFood Grill TimeUsing the Second Oven Second OvenTo FIT the Second Oven Shelf Hints and Tips Second Oven Cooking Chart Second Oven Food Position Cooking Approx TempcUsing Main Oven Grill Main Oven GrillGrilling Chart Using Conventional Cooking Conventional CookingHints and Tips Profi HOT AIR Cooking Using Profi HOT AIR CookingCooking Temperatures PreheatingTo FIT the Main Oven Shelves Oven Cooking Chart FAN Oven ConventionalRoasting Chart MeattemperatureUsing FAN Roasting FAN RoastingCooking Times FAN Roasting Chart Food Position Temp TimeUsing Pizza PizzaUsing Bottom Heat Bottom HeatUsing Defrost DefrostCleaning the Outside of the Appliance Care and CleaningCleaning Materials Cleaning the Control Knobs and HandlesCleaning the HOB When Replacing Hotplate Burner PartsCleaning Inside the Grill and Oven Compartments Aerosol cleaners must not be used on Stayclean surfacesTo Remove the Inner Glass Cleaning the DoorsCleaning Between the Outer and Inner Door Glass To Replace the Inner GlassReplacing AN INTERIOR-LIGHTING Bulb Problem Possible SolutionSomething not WORKING? Service and Spare Parts Guarantee Conditions Standard guarantee conditionsConnections DimensionsTechnical Details GeneralInstallation Instructions Important Safety RequirementsProvision for Ventilation Location of Appliance For Your SafetyMoving Your Appliance Levelling the ApplianceConnecting to the Electricity Supply Ensure That the Links are Fitted AS ShownConnecting to GAS Supply Pressure TestingFitting the Stability Chain Checking LID SHUT-OFF Device Checking the GrillChecking the Hotplate Checking the Second OvenImportant Notice

D77000GF specifications

The Electrolux D77000GF is a standout product in the realm of kitchen appliances, specifically designed as a built-in dishwasher that combines advanced technology, efficiency, and stylish design. This model caters to the modern household that values both performance and aesthetics, making it a top choice for consumers seeking a reliable and effective cleaning solution.

One of the most notable features of the D77000GF is its Energy Efficiency Class, which is rated A+++. This rating not only signifies its exceptional energy-saving capabilities but also reflects a commitment to sustainability, ensuring that users can maintain a clean kitchen without incurring high energy costs. The appliance utilizes advanced technologies that optimize water and energy usage, helping to reduce its impact on the environment.

The Electrolux D77000GF boasts a spacious interior that accommodates up to 13 place settings, making it ideal for families or those who frequently entertain guests. Its flexible loading options include adjustable racks and foldable tines, allowing users to customize the interior space according to their dish collection. This flexibility ensures that larger items can fit seamlessly, while smaller utensils can be efficiently organized.

In terms of cleaning performance, the D77000GF offers multiple wash programs, including Eco, Auto, and Intensive modes. The Auto program intelligently detects the level of soil on dishes and adjusts the wash cycle accordingly, providing optimal cleaning results while conserving resources. The Intensive mode, on the other hand, is designed for heavily soiled items, delivering a thorough clean even for the toughest messes.

Another defining characteristic of this model is its silent operation. With a noise level as low as 44 decibels, the D77000GF is perfect for open-plan living spaces where peace and quiet are valued. This low-noise operation does not compromise on performance, as the appliance is equipped with a powerful motor and advanced spray arm technology that ensures a thorough and effective wash.

The exterior of the Electrolux D77000GF is elegantly designed, featuring a sleek stainless-steel finish that complements any modern kitchen decor. Additionally, the user-friendly control panel provides easy access to all functions and settings, making operation straightforward and convenient.

Overall, the Electrolux D77000GF stands out as an efficient, versatile, and aesthetically pleasing dishwasher that meets the needs of today’s consumers, offering advanced cleaning technology and a commitment to sustainability in a stylish package.
Top Page Image Contents