Electrolux D98000VF operating instructions Installation Instructions

Page 46

INSTALLATION INSTRUCTIONS

WARNING: THIS APPLIANCE MUST BE EARTHED

If your appliance has been damaged in transit, contact your supplier immediately. Do not attempt to install it.

Your appliance left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred, the manufacturer cannot accept responsibility. Contact your supplier for advice.

Once the packaging has been removed the appliance should only be moved by hand. Do not use a sack barrow or any other aid to lift the appliance as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation in all poles. The cable must have conductors of sufficiently high cross- sectional area to prevent overheating and deterioration.

The recommended cross-section area is six square millimetres (6.00mm2).

When refitting the mains terminal cover, ensure that the lower tabs are located inside the bottom edge of the aperture, before fixing the two screws into the top edge of the mains terminal cover. See Fig.1. Ensure that the cover is securely fastened.

To move the appliance, open the oven door, and lift the appliance by holding inside the top of the compartment. See Fig.2.

This is a type Y appliance, which means it is free- standing and can be fitted with cabinets on one or both sides. It may also be fitted in a corner setting.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 2mm at either side of the appliance is required to enable the appliance to be moved into position.

Always ensure an air gap is maintained at hotplate level. Tiles or other forms of deep wall covering should not obscure this gap. See Fig.3.

Overhanging surfaces or a cooker hood should be a minimum of 685mm above the hob. See Fig.4.

It is important to ensure that the appliance is level after installation. Levelling feet are fitted to the appliance to accommodate uneven floors.

46

Fig.1.

Fig.2.

Air gap

Fig.3.

Fig.4.

Page 45 Page 47
Image 46
Page 45 Page 47
Contents D98000VF Important Safety Information Child SafetyContents Description of the Appliance SLIP-IN Electric Multifunction Double OvenGetting to Know Your Appliance FeaturesControl Panel Grill and Oven Furniture Before Using the Appliance HOW to SET the Countdown Electronic TimerHOW to SET the Time of DAY KEYTo SET the Timer to Switch on and OFF Automatically To Cancel the CountdownSetting the Oven Timer Control Heat and HoldTo Return the Appliance to Manual To SET the Timer to Switch OFF onlyTo Cancel AN Automatic Programme Things to NoteOther Functions Using the HOB Timer Using the HOBUsing the Stop + GO Function HOBSwitching OFF the Acoustic Signal Setting the TimeSwitching OFF the Timer Function Selecting a Cooking ZoneRecommended Saucepans Safety CUT-OUTHints and Tips Using Second Oven Grill Second Oven GrillFood Grilling ChartGrill PAN and Handle PositionSecond Oven Conventional Cooking Using Second Oven Conventional CookingTo FIT the Second Oven Shelf Hints and Tips Second Oven Cooking Chart Food Position Cooking Approx TempcHOT AIR Cooking Using HOT AIR CookingCooking Temperatures PreheatingTo FIT the Main Oven Shelves Using Main Oven Conventional Cooking Main Oven Conventional CookingHints and Tips Main Oven Cooking Chart FAN Oven ConventionalRoasting Chart MeattemperatureUsing Pizza PizzaUsing LOW Temperature Cooking LOW Temperature CookingLOW Temperature Cooking Chart FAN Roasting Using FAN RoastingCooking Times FAN Roasting Chart Food Position Temp TimeUsing Main Oven Grill Main Oven GrillMain Oven Grilling Chart Bottom Heat Using Bottom Heat and TOP Heat BrowningMain Oven Bottom Heat and TOP Heat Browning TOP Heat BrowningUsing Keep Warm Main Oven Keep WarmUsing Defrost DefrostFast Heat Using Fast HeatSelecting Fast Heat Cleaning the Outside of the Appliance Care and CleaningCleaning Materials Cleaning the HandlesTo Remove More Stubborn Marks Cleaning the Ceramic HOBDaily Cleaning To Remove Burnt on SoilageTo Reduce HOB Soilage Any of the above products may cause damage to the hobCleaning Inside the Grill and Oven Compartments Aerosol cleaners must not be used on Stayclean surfacesTo Remove the Inner Glass Cleaning the DoorsCleaning Between the Outer and Inner Door Glass To Replace the Inner GlassReplacing AN INTERIOR-LIGHTING Bulb Oven fan is noisy Oven temperature is too high or too low Grill, ovens and timer do not workSomething not WORKING? Service and Spare Parts Guarantee Conditions Standard guarantee conditionsTechnical Details Installation Instructions Connect to 230 240V AC supply only Connecting to the Electricity SupplyEnsure That the Links are Fitted AS Shown Important Notice

D98000VF specifications

The Electrolux D98000VF is a remarkable addition to the world of kitchen appliances, specifically engineered to elevate your culinary experience. This model is designed with a combination of sophistication and practicality, making it an attractive choice for home cooks and professional chefs alike.

One of the standout features of the D98000VF is its powerful motor, which delivers exceptional performance and efficiency. This model boasts a robust suction power that ensures a clean and healthy kitchen environment by effectively eliminating smoke, odors, and grease particles from the air. The appliance operates quietly, allowing for a more pleasant cooking atmosphere without distracting noise.

A hallmark of the Electrolux D98000VF is its sleek and modern design. The appliance features a stainless-steel finish that not only adds aesthetic appeal but also ensures durability and easy maintenance. Its contemporary styling allows it to fit seamlessly into various kitchen decors, enhancing the overall look of the space.

The D98000VF incorporates advanced filtration technology, including a multi-layer grease filter that captures a high percentage of airborne grease and particulates. This filter is easily removable and washable, ensuring ongoing efficiency and cleanliness. Additionally, the appliance is equipped with a charcoal filter, which can be used for recirculating air purification, making it a versatile choice for kitchens without external ventilation options.

Another significant characteristic is the integrated LED lighting that illuminates the cooking surface. This feature increases visibility, allowing for precise cooking and monitoring without obstruction. The adjustable brightness settings ensure that you can customize the lighting to suit your cooking needs and preferences.

Ease of use is a priority for Electrolux, and the D98000VF reflects this philosophy with its intuitive control panel. Users can quickly adjust fan speeds and lighting with a simple touch, allowing for an effortless transition between cooking tasks. The easy-to-read display provides essential information at a glance.

In addition to its practical features, the D98000VF is designed with energy efficiency in mind. It meets stringent energy efficiency standards, helping users save on electricity bills while reducing their environmental footprint.

In summary, the Electrolux D98000VF is a sophisticated kitchen chimney that combines powerful performance, sleek design, and advanced technology to deliver a superior cooking experience. With its excellent filtration system, user-friendly controls, and stylish appearance, it is an investment that can enhance any modern kitchen.
Top Page Image Contents