Electrolux EDB705 manual Care Of Stayclean Surfaces, To Remove The Wirework Runners, Side Panel

Page 26

CARE OF STAYCLEAN SURFACES

CARE OF STAYCLEAN SURFACES

The back panel of the fan oven is coated with a Stayclean finish. This should not be cleaned manually. Aerosol cleaners must not be used on Stayclean surfaces and must not come into contact with elements or the door seal, as this may cause damage.

During normal use the Stayclean coating will become splashed with fats and food residues. By running the oven without food, the Stayclean surfaces burn off any soilage.

TO REMOVE THE WIREWORK RUNNERS

The wirework runners in the grill and oven can be removed for cleaning.

1.Remove all shelves and furniture from the grill / oven compartments.

2.Hold the wirework at the bottom and gently pull towards the centre of the grill or oven compartment.

3.Unhook the runner at the top and remove it from the cavity.

4.To replace, hook the wirework back into the oven sides.

Ensure that the wirework runners are firmly in place before refitting the shelves.

CLEANING THE SHELVES, WIREWORK RUNNERS AND OVEN FURNITURE

Soak the oven shelves, wirework runners and grilling grid in hot soapy water if heavily soiled, they will then clean more easily. If the shelves are heavily soiled a soap impregnated steel wool pad can be used.

The grill pan can be cleaned using a soap impregnated steel wool pad.

All items of grill and oven furniture are dishwasher safe with the exception of the grill pan handle.

SIDE PANEL

CAVITY CENTRE

26

Image 26

Contents ModelEDB705 CHILD SAFETY IMPORTANT SAFETY INFORMATIONINSTALLATION CLEANING AND MAINTENANCEImportant Safety Information Description of the appliance CONTENTS13 FOR THE INSTALLER Before Using The ApplianceBuilt in electric oven and grill WARNING THIS APPLIANCE MUST BE EARTHED Grill Electronic Timer ControlDESCRIPTION OF THE APPLIANCE Knob Control Panel OvenThe Control Panel Electronic Timer Grill Control Fan oven neon Oven ControlGETTING TO KNOW YOUR OVEN Always allow the cooling fan to cool CONTROL PANEL INDICATOR NEONTHE COOLING FAN FOR THE CONTROLS RATING PLATE BEFORE USING THE APPLIANCEWHEN FIRST SWITCHING ON PREPARING TO USE YOUR APPLIANCECOOKWARE 2 shelves for oven cooking 1 shelf for grilling GRILL AND OVEN FURNITURE1 grill pan 1 grill pan handle 1 grill pan grid THE MINUTE MINDER THE ELECTRONIC TIMERTO SET THE TIME OF DAY AUTOMATIC TIMER CONTROL TO SWITCH THE OVEN ON AND OFF AUTOMATICALLYRETURNING THE APPLIANCE TO MANUAL OR TO CANCEL AN AUTOMATIC PROGRAMME TO SET THE TIMER TO SWITCH OFF ONLYUSES OF THE GRILL HOW TO USE THE GRILLTHE GRILL TO FIT THE GRILL SHELFTHE GRILL PAN AND HANDLE Protect your hands when removing the grill pan handleEnsure that the grill pan is supported when it is withdrawn Ensure the handle is positively locatedPage GRILLING CHART USES OF THE FAN OVEN HOW TO USE THE FAN OVENTHE OVEN PREHEATINGTO FIT THE OVEN SHELVES FAN OVEN COOKING CHART ROASTING CHART ROASTING CHARTHOW TO DEFROST DEFROST FEATUREUSES OF DEFROST FEATURE Always cook thoroughly immediately after thawing CLEANING THE OUTSIDE OF THE APPLIANCE CARE AND CLEANINGCLEANING MATERIALS CLEANING THE BRASS PLATED HANDLES AND CONTROLSBath/Sink stain removers CLEANING THE OUTER AND INNER DOOR GLASS PANELSTO REMOVE THE OUTER GLASS TO REPLACE THE OUTER DOOR GLASS TO CLEAN THE INNER GLASS DOORCLEANING THE OVEN AND GRILL COMPARTMENT DO NOT attempt to use the oven without the glass being in placeCLEANING THE SHELVES, WIREWORK RUNNERS AND OVEN FURNITURE CARE OF STAYCLEAN SURFACESTO REMOVE THE WIREWORK RUNNERS SIDE PANELCOOKING TO REDUCE SOILAGE REPLACING AN OVEN LIGHT BULBThe grill, ovens and timer do not work PROBLEMPOSSIBLE SOLUTION The timer does not work19. Be prepared to adjust the temperature up The oven fan is noisyThe oven temperature is too high or low Check that the oven is levelCUSTOMER CARE DEPARTMENT 0870 5SERVICE AND SPARE PARTS Tel 0870 5 calls to this number may be recorded for training purposesStandard guarantee conditions GUARANTEE CONDITIONSThis guarantee does not cover European GuaranteeTECHNICAL DETAILS CHOICE OF ELECTRICAL CONNECTION INSTALLATION INSTRUCTIONSWARNINGS WARNINGSNOTE HOUSE CIRCUIT NOTE It is good practice toPREPARING CABINET FOR FITTING OVEN HOW TO FINISH UNPACKING MAKING THE ELECTRICAL CONNECTIONS TO REMOVE COVER OF MAINS TERMINALCONNECTING TO THE MAINS TERMINAL Warning This appliance must be earthedCONNECTING TO A HOB OR COOKER POINT CHECKING ELECTRICAL CONNECTIONSN.B. Two people will be required to carry out the lifting procedure FITTING INTO THE SPACE BETWEEN CABINETSN O T E S EDB705 N O T E S IMPORTANT NOTICE ELECTROLUX 55 - 77 HIGH STREET SLOUGH BERKSHIRE SL1 1DZTELEPHONE 0870 5 Part Number