CARE AND CLEANING
Before cleaning the appliance always allow the cooling fan for the controls to cool the appliance down before switching off the electricity supply.
CLEANING MATERIALS
Before using any cleaning materials on your appliance, check that they are suitable and that their use is recommended by the manufacturer.
Cleaners that contain bleach should NOT be used as they may dull the surface finishes. Harsh abrasives should also be avoided.
CLEANING THE BRASS PLATED HANDLES AND CONTROLS
(WHERE APPLICABLE)
It is strongly recommended that only hot soapy water is used for cleaning the handles and controls. ANY OTHER CLEANING MATERIALS WILL DULL THE BRASS PLATED FINISH.
CLEANING THE OUTSIDE OF THE APPLIANCE
DO NOT use abrasive cleaning materials e.g Hob Brite, Brillo pads or scourers on painted or printed finishes as damage may occur. Regularly wipe over the control panel and oven doors using a soft cloth well wrung out in warm water to which a little washing up liquid has been added.
Do not attempt to remove any of the control knobs from the panel as this may cause damage.
23