Electrolux D8800-4 To FIT the Main Oven Shelves, Using the Telescopic Runners, Where fitted

Page 23

TO FIT THE MAIN OVEN SHELVES

The shelves should be fitted with the straight rods uppermost on the frame and the forms towards the back of the oven.

To remove a shelf slide the shelf towards you until the shelf stop is reached. Tilt shelf up at the front so that the stops clear the side supports. Lift shelf clear. To install a shelf, reverse the above steps. Each shelf position has an upper and lower support wire, ensure the shelf is placed between these two support wires.

USING THE TELESCOPIC RUNNERS

(where fitted)

1.Ensure the telescopic runners are pushed back into the oven cavity before fitting the shelf.

2.Holding the front edge of the shelf with both hands, place the rear shelf forms over the telescopic runners.

3.Slide the shelf into position, lifting slightly at the front so that the shelf locates into the retaining hooks.

To remove, raise the front edge and withdraw the shelf.

Ensure the shelf is positively located before using.

Note:

Should you wish to purchase a telescopic runner kit, this can be ordered from your local Service Force Centre by quoting part number (BAZ D02).

HINTS AND TIPS

•Arrange the shelves in the required positions before switching the oven ON. Shelf positions are counted from the bottom upwards.

•When cooking more than one dish in the fan oven, place dishes centrally on different shelves rather than cluster several dishes on one shelf, this will allow the heat to circulate freely for the best cooking results.

•When batch baking one type of food, e.g. Victoria sandwich cakes, those of similar size will be cooked in the same time.

•It is recommended that when baking larger quantities the shelf positions should be evenly spaced to suit the load being cooked. A slight increase in cooking time may be necessary.

•Do not place baking trays directly on the oven base as it interferes with the oven air circulation and can lead to base burning; use the lower shelf position.

Do not place cookware and cooking pots with rough bases e.g. cast iron on the oven door as damage to the glass may occur.

RETAINING HOOK

FORM

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Competence D8800-4 Important Safety Information Contents BUILT-IN Electric Multifunction Double Oven Description of the ApplianceControl Panel Getting to Know Your ApplianceGrill and Oven Furniture Telescopic Runners Where FittedBefore Using the Appliance KEY Electronic TimerHOW to SET the Time of DAY HOW to SET the CountdownTo SET the Timer to Switch on OFF Automatically To Cancel the CountdownSetting the Oven Timer Control Things to Note To SET the Timer to Switch OFF onlyTo Cancel AN Automatic Programme To Return the Appliance to ManualResidual Heat Child Safety DeviceOven Safety CUT-OUT Other FunctionsSecond Oven Full Width Dual Grill Using Full Width Dual GrillEnsure the handles are positively located Grill PAN and HandlesHints and Tips Mins in total Grilling ChartSecond Oven Conventional Cooking Using Second Oven Conventional CookingTo FIT the Second Oven Shelf Second Oven Food Shelf Cooking Approx Position Tempc Second Oven Cooking ChartSecond Oven Base Heat Finishing Using Base Heat FinishingSecond Oven Keep Warm Using Keep WarmMain Oven Full Width Dual Grill Using Main Oven Full Width Dual GrillFood Shelf Grill Time Ventitherm Precision FAN Cooking Using Ventitherm Precision FAN CookingTo FIT the Main Oven Shelves Using the Telescopic RunnersWhere fitted HOT AIR FAN Baking Using HOT AIR FAN BakingConventional Cooking Using Conventional CookingHints and Tips FAN Oven Conventional Oven Main Oven Cooking ChartMeattemperature Roasting ChartCooking Times Using Rotitherm RoastingRotitherm Roasting Food Shelf Temp Rotitherm Roasting ChartPizza Using PizzaFAN Controlled Defrosting Using FAN Controlled DefrostingMain Oven Keep Warm Selecting Speedcook Using SpeedcookSpeedcook Removing and Replacing Wirework Runners Care and CleaningCleaning Materials Cleaning the Outside of the ApplianceAerosol cleaners must not be used on Stayclean surfaces Cleaning Inside the OvensTo Remove the Inner Glass Cleaning the DoorsTo Clean the Inner Glass Door Panels Replacing AN Oven Light Bulb Main Oven Cleaning the Grill and Oven FurnitureTo Replace the Inner Glass Panel Something not Working Grill, ovens and timer do not workOven fan is noisy Oven temperature is too high or too low Service and Spare Parts Standard guarantee conditions Guarantee ConditionsTechnical Details Do not lift the appliance by the handles Installation InstructionsPreparing Cabinet for Fitting of Oven Choice of Electrical ConnectionBuilt In Installation Recommended Cabinet Dimensions in MillimetresTo Remove Cover of Mains Terminal HOW to Finish UnpackingChecking Electrical Connections Connecting to the Mains TerminalConnecting to a HOB or Cooker Point Fitting Into the Cabinet Page Page Page LU4 9QQ Telephone 0870 5

D8800-4 specifications

The Electrolux D8800-4 is a sophisticated and versatile vacuum cleaner designed to meet the needs of modern households. Combining cutting-edge technology with user-friendly features, this appliance stands out in the competitive market of vacuum cleaners.

One of the main features of the D8800-4 is its powerful suction capability. Equipped with a high-efficiency motor, it delivers exceptional performance on various surfaces, from carpets to hard floors. The vacuum's ability to adapt to different floor types makes it suitable for a wide range of cleaning tasks, ensuring that dirt and debris are effectively removed.

Another notable characteristic of the D8800-4 is its advanced filtration system. It incorporates a HEPA filter, which captures 99.97% of allergens and fine dust particles. This feature is particularly beneficial for allergy sufferers, as it helps to maintain a cleaner indoor environment. Additionally, the vacuum is designed to ensure that emissions are minimal, further improving air quality in the home.

The design of the D8800-4 reflects user-centric considerations. It is lightweight and easy to maneuver, allowing users to navigate around furniture and tight spaces with ease. The vacuum also features a telescopic handle, which can be adjusted for optimal comfort during use. This makes it suitable for users of varying heights, reducing strain on the back and arms.

The D8800-4 is also equipped with a range of attachments and accessories, enhancing its versatility. It comes with specialized tools, such as a crevice nozzle for tight spaces and a turbo brush for upholstery and pet hair. These attachments allow users to tackle different cleaning challenges, making the vacuum a comprehensive solution for home maintenance.

Furthermore, the vacuum cleaner features a bagless design, which simplifies maintenance and reduces ongoing costs associated with purchasing replacement bags. The transparent dust container allows users to easily see when it needs to be emptied, promoting timely disposal of collected dirt.

In addition to its functionality, the D8800-4 is designed with sustainability in mind. The materials used in its construction are environmentally friendly, and the energy-efficient motor ensures that power consumption is kept to a minimum. This aligns with the growing consumer demand for eco-friendly household appliances.

In summary, the Electrolux D8800-4 is a dynamic vacuum cleaner that combines powerful suction, advanced filtration, ergonomic design, and versatile attachments to deliver an exceptional cleaning experience. Its thoughtful features and commitment to sustainability make it an attractive choice for those looking to maintain a clean and healthy home environment.
Top Page Image Contents