Electrolux U 96040-4 i installation instructions Technical terminology, Noises during Operation

Page 31

Technical terminology

Refrigerant

Liquids that can be used to a generate a cooling effect are known as refrigerants. They have a relatively low boiling-point, indeed so low, that the warmth from the food stored in the fridge or freezer can cause the refrigerant to boil and vaporise.

Refrigerant Circuit

Closed circulation system that contains the refrigerant. The refriger- ant circuit comprises primarily of an evaporator, a compressor, a con- denser and pipe work.

Evaporator

The refrigerant is evaporated in the evaporator. Similar to all other liquids, refrigerant requires heat to evaporate. This heat is removed from the interior of the appliance, as a result the interior is cooled. The evaporator is therefore located inside the appliance or placed in foam immediately behind the inner wall and thus not visible.

Compressor

The compressor looks like a small drum. It is driven by a built-in electric motor and is mounted on the base of the appliance at the rear. The task of the compressor is to draw in vaporised refrigerant from the evaporator, to compress it, and to pass it on to the con- denser.

Condenser

The condenser normally has the form of a grid. The refrigerant com- pressed in the compressor is liquefied in the condenser. During this process, heat is released to the surrounding air at the surface of the condenser. The condenser is mounted on the base of the appliance.

Noises during Operation

The following noises are characteristic of refrigeration appliances:

Clicks

Whenever the compressor switches on or off, a click can be heard.

Humming

As soon as the compressor is in operation, you can hear it humming.

Bubbling/Splashing

When refrigerant flows into thin tubes, you can hear bubbling or splashing noises. Even after the compressor has been switched off, this noise can be heard for a short time.

31

Image 31 Contents
Santo Dear customer Contents Refrigerant Important Safety InstructionsSafety of children Prior to initial start-upCase of malfunction Daily OperationDisposal DisposalAppliance Packaging Information Disposal of Old AppliancesInstallation Location InstallationRemove transport packaging Left door opening Grid preparationReversing the door 600 Installation kit Installation Click Ures27,5 Refit the covering strip Fitting the plinth Power supplyGreen and Yellow Earth BlueNeutral BrownLive Electrical ConnectionPrior to Initial Start-Up Description of the applianceView of the appliance Setting 0 means Off Starting up and temperature regulationInterior Accessories Switching off the applianceStorage shelves Bottle Holder Variable Storage BoxFreezing and storing frozen food Correct storageTips Preparation of Ice CubesFridge defrosts automatically DefrostingDefrosting the freezer compartment Cleaning and Care Energy Saving Tips What to do if Symptom Possible Cause RemedyCorrecting Malfunctions Changing the Light Bulb Regulations, Standards, Guidelines0870 5 Service and Spare PartsCustomer Care Department European Guarantee Standard guarantee conditionsExclusions Noises during Operation Technical terminologyAEG Hausgeräte GmbH Postfach 90327 Nürnberg Electrolux plc