![](/images/new-backgrounds/1063192/6319215x1.webp)
Installation
It is necessary to avoid overheating of the refrigerator by maintaining adequate distances from heat sources and by the use of a suitable thermal insulation plate. Proper ventilation of the appliance must also be ensured.
Grid preparation
The side at which the door opens can be changed from the right side (as supplied) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, remove plug from the mains.
Left door opening:
☞1. Remove the left side (A) of the grid cutting it from the rear (see figure).
2.Remove the right side (B) of the grid cutting it from the rear (see figure).
A |
B |
3.
a |
a |
DO001 |
8