Electrolux D4150-1 manual Replacing AN Oven Light Bulb

Page 34

REPLACING AN OVEN LIGHT BULB

The type of bulb required is a 300°C 25 watt small Edison Screw.

(Available through Service Force Centres).

Disconnect the appliance from the electricity supply before replacing the bulb.

1.Make sure the appliance is cool before replacing the bulb.

2.Open the oven door and remove the shelves and wirework runners.

Instructions on how to remove the wirework runners are given on page 31.

3.Pull the glass bulb cover towards you and then pull it off. If necessary, use a screwdriver to carefully lever off the cover, taking care not to damage the oven cavity.

4.Unscrew the bulb by turning it to the left.

5.Fit a new bulb and then replace the glass bulb cover.

6.Replace the oven shelves.

7.Restore the electricity supply and reset the time of day.

34

Image 34

Contents Competence D4150-1 Important Safety Information Contents Page Getting to Know Your Oven Control PanelGrill and Oven Furniture Before Using the Oven for the First Time HOW to SET the Countdown Electronic TimerSET the Time of DAY Setting the Oven Timer Control To Cancel the CountdownTo SET the Timer to Switch on and OFF Automatically To SET the Timer to Switch OFF only To Return the Appliance to Manual To Cancel AN Automatic ProgrammeAutomatic Cooking Using the Grill Dual GrillGrill PAN and Handle Hints and TipsGrilling Chart Food Shelf Grill TimeSecond Oven Using the Second OvenTo FIT the Second Oven Shelf Hints and Tips Second Oven Cooking Chart Food Shelf Cooking Approx Position Temp CMain FAN Oven Using the Telescopic Runners Where fittedUsing the Conventional Oven Conventional OvenHints and Tips Oven Cooking Chart FAN Oven ConventionalInternal Temperatures Roasting ChartRoasting Chart Meat SECOND/FAN Cooking Time OvenUsing Pizza Function Pizza FunctionSpeedcook Using SpeedcookCooking Times Using Thermal Grilling Thermal GrillingThermal Grilling Chart Food Shelf TempUsing Defrost Feature DefrostingPage Helpful Hints When Buying and Preparing Food Meat TemperaturesCleaning the Outside of the Oven Care and CleaningCleaning Materials Removing and Replacing Wirework Side RunnersCleaning the Door Glass Cleaning Inside the OvensTo Remove the Inner Glass Cleaning the Grill and Oven Furniture To Clean the Inner Glass Door PanelsTo Replace the Inner Glass Panel Replacing AN Oven Light Bulb Problem Something not WorkingOven light fails to illuminate Customer Care Department Service and Spare PartsSL1 1DZ Guarantee Conditions Standard guarantee conditionsInstallation Instructions Technical DetailsChoice of Electrical Connection Preparing Cabinet for Fitting of Oven Do not lift the appliance by the handlesCross section Making the Electrical Connections HOW to Finish UnpackingTools Required Preparing CableTo Remove Cover of Mains Terminal Connecting to a HOB or Cooker Point Connecting to Mains TerminalChecking Electrical Connections Fitting Into the Cabinet T E S AEG Domestic Appliances