OPERATION
MAKING ESPRESSO
Follow the instructions below to make espresso:
1
Preheat the unit as shown on the previous page. Open the tank cover and fill with cold water as desired. Insert Espresso Filter into the Espresso Handle. Add coffee grounds to Espresso Filter with the measuring spoon. Pack (tamp) the espresso firmly using the back of the measuring spoon. A spoon of coffee grinds can make a cup of
2
Pull the Thumb Bar so it is against the handle. Insert Espresso Filter into the Espresso Handle and push the Thumb Bar to hold the Espresso Handle in place. Make sure the handle on the Espresso Handle aligns with the arrow (next to the word, INSERT) on the maker, then release the Thumb Bar and insert the Espresso Handle into place. Lock it into the maker by turning it counterclockwise until it is in the ‘lock’ position.
3
2 
1 
Place a cup on the Drip Tray Shelf and with the Steam control set to OFF, press the Espresso ON/OFF button 1
to the in (ON 
) position; the orange Power indicator will light. Press the Espresso/Cappuccino button 2 to
the Espresso (
) position.
4
Press the Pump button to the STOP
(
STOP) position until the green Heat indicator lights then press the
Pump button to the PUMP
(
PUMP/ 
) position to start the brewing.
5 |
| When the espresso brewing is | |
|
| completed, press the Pump button | |
|
| 1 to the STOP ( | STOP) position |
|
| and Espresso ON/OFF button 2 to | |
1 | 2 | the out ( OFF | ) position; the |
|
| orange Power and green Heat | |
|
| indicators will turn off. | |
|
| 11 |
|