Care & Cleaning 33
6. Remove and empty the used coffee grounds bin.
IMportant
The power switch must be on while dumping out the used coffee grounds bin for the “Drawer Full” message to clear from the display.
Remove Used
Coffee Grounds
Bin
7.Use the provided cleaning brush to remove any residual coffee grounds from the piston assembly and the inside of the brewing unit.
Warning
•The piston assembly is hot!
•To prevent damage to the front panel, make sure the drip tray is removed before closing it.
8.Replace the used coffee grounds bin.
9.Make sure the drip tray is removed. Close the front panel door and lock it. Remove the key.
10.Push the unit back into the cabinet and replace the drip tray.
Clean Piston
Assembly
WARNING: HOT
11.Flush the system out according to the instructions on page 39. The “Clean Group” message should disappear after the flush is done.