34Care & Cleaning
Cleaning The Outside Surfaces
CAUTION
•To prevent damage to stainless steel surfaces, always wipe in the direction of the grain.
•Use only the cleaners indicated. Chlorine or chlorine compounds in some cleaners are corrosive to stainless steel.
•DO NOT use abrasives to clean stainless steel surfaces.
•Never allow beverage stains, creamers or sugar to remain on stainless steel for any length of time.
Wipe stainless steel surfaces with a damp, soft cloth soaked with mild detergent to remove beverage stains, fingerprints, and other smudges.
Decalcification Instructions
The monthly decalcification and cleaning process cleans out mineral deposits in the water and coffee delivery systems. If the mineral deposits are allowed to build up, the coffee maker will eventually stop working properly. The decalcification process takes about 4 minutes.
CAUTION
The decalcification powders, tablets and solutions can damage stainless steel surfaces. To avoid damage, rinse any surfaces that come into contact with the decalcification powder, tablets and solutions thoroughly with a mild solution of warm water and detergent.
What to Use
Model | Electrolux* | Description | |
| Part Number | ||
|
| ||
|
| Reusable flushing cartridge | |
E24CM76GSS | and Puly Decalcification | ||
|
| Powder. | |
E24CM75GSS and | Puly Cleaning tablets and | ||
E24CM76GSS | Decalcification Powder | ||
| |||
|
| Filtered Water (4 gpg | |
E24CM75GSS | - | maximum water hardness... | |
|
| DO NOT use distilled water |
*Purchase from your Electrolux Dealer
**A starter supply is included with your unit. Use this number to reorder