Care & Cleaning 39
3.Pour a packet of Puly Decalcifying Powder into a 16 ounce bottle. Fill the bottle with warm filtered water and shake well until the powder is dissolved.
4.Pour the mixture into the water tank.
5.Fill the tank with filtered water until it is half full.
6.Push and hold the Decaf Coffee button until “Insert Cleanser“ appears on the display.
7.Push Decaf Coffee again to immediately start the cleaning cycle. If the Decaf Coffee button is not pushed again, the cleaning cycle will automatically start in about 20 seconds. The cleaning process takes about 10 minutes. The coffee maker will turn off and on several times during the process.
8.When “Machine Ready” appears on the display, the cleaning process is done.
9.Push the Hot Water button to clean out the water dispenser. Wait until water stops coming out of the dispenser.
10.Repeat step 9, four more times.
11.Flush the residual detergent out of the system (see below).
Flushing Out The Coffee Maker
A.If your unit is equipped with a water tank, remove it from the unit. Empty it and rinse it out with filtered water. Fill the water tank with filtered water until full and put it back in the unit.
B.With an empty
C.Push the Decaf Coffee button again to immediately start rinsing out the unit. Note that if the Decaf Coffee button is not pressed again, the rinse will automatically start in about
20 seconds. The rinse process takes about 10 minutes. The coffee maker will turn off and on several times during the process.
D.When the final rinse is complete, the display will read “Machine Ready”.
E.Push the Hot Water button to rinse out the water dispenser. Wait until water stops coming out of the dispenser.
F.Repeat step E, four more times.