Cuisinart DTC-975BKN Brewing Coffee, Before First use, To Set The Clock, To Program the Brew Time

BEFORE FIRST use

We recommend flushing out your coffeemaker before first use.

Fill the reservoir with cold water and follow the directions for Brewing Coffee. Do not add coffee!

Once the system flush is complete, your coffeemaker is ready to brew so you can enjoy Cuisinart at its best!

PROGRAMMING YOUR COFFEEmAKER

To Set The Clock

1.To set the time, press and hold the hour or minute button for two seconds. “Time set” starts flashing in the upper left corner of the LCD screen.

2.Press the HOUR button to advance the clock to the desired time. The hour numeral moves in one-hour increments. When numeral passes 12 am, the PM indicator will illuminate in the lower left corner of the LCD screen.

3.Press the MINUTE button to advance the minutes to the desired time. Minutes move in one-second increments.

4.When complete, press the HOUR button again, or wait for 15 seconds and your time change will be accepted.

To Program the Brew Time

1.To program the brew time, press and hold the PROG button for two seconds. The “prog” symbol starts flashing in the lower right corner of the LCD screen.

2.Press the HOUR button to advance the clock to the desired time. The hour numeral moves in one-hour increments. When numeral passes 12 am, the PM indicator will illuminate in the lower left corner of the LCD screen.

3.Press the MINUTE button to advance the minutes to the desired time. Minutes move in one-second increments.

4.When complete, press the PROG button, or wait for 15 seconds and your set time will be accepted.

To Activate the Auto Brew Cycle

1.To activate the auto brew mode, depress the AUTO ON button. The auto symbol will illuminate in the upper right corner of the LCD screen.

2.The unit will now begin the brewing cycle at the programmed time. When the pro- grammed time initiates the cycle, the red ON indicator light will show that the brew- ing cycle has started.

NOTE: The unit will continue to attempt to brew at the programmed time, each day, until the OFF button is pressed. The red ON indicator light will illuminate each time the attempt to brew is made. If there is no water in the reservoir, the unit will automatically shut off one minute later.

Brewing COFFEE

Follow instructions in “Before First Use” on this page.

1.Open thermal carafe lid in direction of arrow. Fill thermal carafe with cold, fresh water. Open hinged water reservoir cover; pour water into reservoir opening. Markings on water level indicator show amount of water needed to make desired number of cups of coffee. TO AVOID OVERFLOW, DO NOT FILL ABOVE 12-CUP MARK. Close reservoir cover.

2.Before thermal carafe is returned to platform, prewarm carafe by running warm water through it. Prewarming carafe will help keep coffee warmer.

3.Return carafe lid to thermal carafe. To close lid, turn it in direction of Close arrow until it fits tightly on carafe, and Pour arrow is aligned with spout. Return empty thermal carafe to platform. Be certain thermal carafe lid is in closed position and is securely in place during brew cycle.

4.Open filter basket by grasping basket handle and swinging outward. Insert a paper filter OR gold-tone filter (not included) into filter basket; make sure filter fits snugly in basket.

5.After placing 2 level tablespoons per cup of ground coffee into cone filter, return basket to closed position. To ensure safe operation,

6