Clearance Dimensions

Professional Built-In Gas 24”W. Rangetop

Minimum clearances from adjacent combustible construction

•Cooking surface and below, i.e., 36” (91.4 cm) and below

o Sides—0” o Rear

•0” with backguard or high-shelf

•0” with island trim and non- combustible rear wall

•6” (15.2 cm) with island trim and

combustible rear wall

o Top grate support—3/8” (1.0 cm) above countertop

•Above cooking surface, i.e., above 36” (91.4 cm)

o Sides

o VGWT/VGGT—6” (15.2 cm) o VGQT—9” (22.9 cm)

o Within the side clearance, wall cabinets no deeper than 13” (33.0 cm) must be minimum 18” (45.7 cm) above cooking surface.

•Wall cabinets directly above product must be minimum 42” (106.7 cm)

*This minimum height requirement does not apply if a rangehood is installed over the cooking surface.

Do not install two or more units side-by-side.

P L A N N I N G A N D D E S I G N G U I D E	R E L E A S E D 1 2 / 1 / 0 7
V I K I N G R A N G E . C O M • 1 - 8 8 8 - V I K I N G 1	© 2 0 0 7 V R C — I N F O R M AT I O N S U B J E C T T O C H A N G E

CLEARANCE DIMENSIONS