Duct Cover Option
(VWH 10” H./12”H. Wall Hoods w/Standard Ventilator)
1 | 2 | 2 |
|
Installation
(VWH 10” H./12”H. Wall Hoods w/Recirculating Kit)
3 | 4 |
Attach with screws and lock washers provided. | Attach with screws. |
Measure distance from ceiling to canopy. | Slide the duct cover in place and fasten from inside |
| canopy using the sheet metal screws provided. |
Installation
(VWH 12”H. Wall Hoods w/Recirculating Kit)
5
Remove electrical box cover.
W A R N I N G
To reduce the risk of fire, electric shock, or injury to persons, observe the following:
•Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.
•Before servicing or cleaning unit, switch power off at service panel and lock service panel to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
1 | 2 |
Remove damper and discard with transition. | Turn recirculating unit upside down. Place vent hood |
| upside down on recirculating unit. |
6
1
2 |
Flip hood over. Insert 6” of electrical wiring through the top of vent hood and secure. Refer to local codes.
7
5/16” nut driver
CAUTION: Secure vent hood. Make sure mounting screws are secured into framing. Use additional mounting screws and wall anchors, if necessary.
30 | 31 |