Viking F20705A EN manual Cleaning and Maintenance

Page 18

Cleaning and Maintenance

Any piece of equipment works better and lasts longer when maintained properly and kept clean. Cooking equipment is no exception. Your range must be kept clean and maintained properly. Before cleaning, make sure all controls are in the “OFF” position. Disconnect power if you are going to clean thoroughly with water.

Open Surface Burners

Wipe up spill-overs as soon as possible after they occur and before they get a chance to burn in and cook solid. In the event of a spill-over, follow these steps:

•Allow the burner and grate to cool to a safe temperature level.

•Lift off the burner grate. Wash in warm soapy water.

•If the spill is contained in the bowl of the grate support, just remove the bowl and clean in warm soapy water.

•Lift the grate support off.

•Wash these parts in hot, soapy water and rinse clean.

•If the spill has gone lower than the grate supports, draw out the drip pan and wash with hot, soapy water.

If ports on the burners are clogged, clean with a straight pin. DO NOT enlarge or distort the ports. DO NOT use a toothpick to clean the ports. When replacing burner caps, carefully align the tabs underneath the cap with the outside edge of burner. Make sure burner cap is level. Occasionally check the burner for proper size and shape. If flames lift off ports, are yellow, or are noisy when turned on, you may need to clean the burners or call a qualified technician for adjustment.

Burner Caps

The surface burner caps should be routinely removed and cleaned. ALWAYS clean the burner caps after a spill-over. Keeping the burner caps clean will prevent improper ignition and uneven flames. To clean, pull burner cap straight up from the burner base. Wipe off surface burner caps with warm, soapy water and a soft cloth after each use. Use a non-abrasive cleanser such as Bon Ami™ and a soft brush or soft Scotch Brite™ pad for cooked-on foods. Dry thoroughly after cleaning. For best cleaning and to avoid possible rusting, DO NOT clean in dishwasher or self-cleaning oven.

Product Care

Cleaning and Maintenance

Control Panel

DO NOT use any cleaners containing ammonia or abrasives. They could remove the graphics from the control panel. Use hot, soapy water and a soft clean cloth.

Oven Surfaces

Several different finishes have been used in your oven.

NEVER USE AMMONIA, STEEL WOOL PADS OR ABRASIVE CLOTHS, CLEANSERS, OVEN CLEANERS, OR ABRASIVE POWDERS. THEY CAN PERMANENTLY DAMAGE YOUR OVEN.

Control Knobs

MAKE SURE ALL THE CONTROL KNOBS POINT TO THE OFF POSITION BEFORE REMOVING. Pull the knobs straight off. Wash in detergent and warm water. Dry completely and replace by pushing firmly onto stem. DO NOT use any cleaners containing ammonia or abrasives. They could remove the graphics from the knob.

Stainless Steel Parts

All stainless steel body parts should be wiped regularly with hot soapy water at the end of each cooling period and with a liquid cleaner designed for that material when soapy water will not do the job. DO NOT use steel wool, abrasive cloths, cleansers, or powders. If necessary, scrape stainless steel to remove encrusted materials, soak the area with hot towels to loosen the material, then use a wooden or nylon spatula or scraper. DO NOT use a metal knife, spatula, or any other metal tool to scrape stainless steel. DO NOT permit citrus or tomato juice to remain on stainless steel surface, as citric acid will permanently discolor

stainless steel. Wipe up any spills immediately.

Glass Surfaces

Clean with detergent and warm water. Glass cleaner can be used to remove fingerprints. If using glass cleaner ammonia, make sure that it does not run down on exterior door surface.

Product Care

34

35

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Viking Use & Care Manual Table of Contents CongratulationsRecognize Safety Symbols, Words, Labels Tipping HazardGetting Started To Prevent Fire or Smoke Damage Utensil Safety About Your Appliance Electrical Shock HazardBefore Using Range OvenBurn Hazard Range Features Vgic Product ControlsOven Functions and Settings Oven Features Surface OperationConvection Cooking Tips Using the OvenConventional and Convection Cooking Natural Airflow BakeTo Use Convection Bake Function Pan Placement TipsBaking Baking TipsConventional Baking Chart Convection Baking ChartProblems Cause Remedy Solving Baking ProblemsCommon Baking Problems/Remedies BroilingBroiling Tips Broiling InstructionsTo Use Broil or Convection Broil Rack Positions for BroilingBroiling Chart Convection DehydrateConvection Dehydrate Cooking Substitutes Charts Convection DefrostCleaning and Maintenance Broiler Pan and Grid Replacing Oven LightsBrass Parts Oven RacksTo Prevent Personal Injury Door Replacement and AdjustmentDoor Removal CareProductTroubleshooting Service InformationProblem Possible Cause and/orRemedy Warranty Five Year Limited Warranty on Burners

F20705A EN specifications

The Viking F20705A EN is a remarkable model in the Viking range, known for its blend of performance, durability, and advanced technology. Designed for users who demand efficiency and reliability, this model stands out as an excellent choice for both professional and home use.

At its core, the Viking F20705A EN is powered by a robust engine that delivers consistent performance across various tasks. The engine’s efficiency not only enhances productivity but also ensures lower fuel consumption, making it an environmentally responsible choice. The design of the F20705A EN incorporates an advanced cooling system, allowing the engine to maintain optimal temperatures during extended use, thus prolonging its lifespan.

One of the main features of the Viking F20705A EN is its user-friendly interface. The controls are intuitively laid out, enabling users to navigate settings effortlessly. Additionally, the model comes equipped with a digital display, providing real-time information about performance metrics such as speed and runtime, which helps users manage their tasks more effectively.

The build quality of the Viking F20705A EN is another standout characteristic. Constructed with high-grade materials, the machine offers exceptional durability and can withstand harsh working conditions. The chassis is designed to resist wear and tear, ensuring that the Viking F20705A EN remains operational for years with minimal maintenance.

Technologically, the Viking F20705A EN integrates several advanced features to enhance user experience. It includes automatic adjustment mechanisms that allow the model to adapt to different terrains, ensuring optimal performance regardless of the environment. Furthermore, ergonomic design elements, such as comfortable handles and balanced weight distribution, ensure that users can operate the machine with ease for extended periods without discomfort.

Safety features are also a priority in the Viking F20705A EN. It is equipped with emergency shut-off mechanisms and non-slip surfaces, minimizing the risk of accidents during operation.

In summary, the Viking F20705A EN combines a powerful engine, user-friendly controls, durable construction, and advanced technology to deliver outstanding performance and reliability. Whether for professional landscaping or home gardening, this machine stands ready to meet a variety of needs, making it a valuable asset for any user.
Top Page Image Contents