Wolf Ventilation Hood installation instructions M Ot E B L O W E R W I R I N G

W O L F COOKTOP VENTILATION HOODS

REMOTE B L O W E R S

R E M OT E B L O W E R W I R I N G

1)Remove the cover from the front of the electrical box. Remove the electrical box knockout that faces the hood's discharge collar.

2)Disconnect the red and black or white wires using a flat-blade screwdriver. Refer to illustration A below.

3)Insert 6" (152) of the remote blower wiring through the knockout opening. Secure the cable to the electrical box with an appropri- ate connector. Use wire connectors or wire nuts approved by UL or C/UL.

4)Attach the remote blower wiring where the wires were removed in step 2. Refer to illustration B below.

IMPORTANT NOTE: Before turning the power on to the ventilation hood, make sure the blower is in the OFF position.

IMPORTANT NOTE: Note location of wire colors.

5)Reinstall the electrical box cover and screws. Make sure that all wires are secure and that no wires are pinched between the cover and box.

small
flat-blade
screwdri			discharge
	ver
				collar
				black or
				white
				(neutral)
front			red
electrical
box			TOP OF
HOOD FRO		NT	HOOD SHELL

white
(neutral)
red
						disc		harge
green/									colla	r
yellow
white
(neutral)
black
					exte		rnal
front					blower
electric		al b		ox	wiring
						TOP OF
HOOD	FRO		NT		HOOD SHELL

Remote blower wiring A Remote blower wiring B

14