Remote Control Battery
The remote control requires one
You must remove this battery spacer tab before you can use the remote control.
To remove the tab, pull it in the direction of the arrow in the illustration as shown.
Remove before use
Remueva antes de usar
When the operation of the remote control becomes intermittent or unsatisfactory, replace the original battery with a new
The battery number is CR2025 or equivalent.
To replace the battery, slide the battery holder out of the remote control as shown in the following illustration.
Remove the original battery from the holder and install a new CR2025 battery with the “+” side facing up as shown in the illustration. Then slide the battery holder back into the remote control.
Dispose of the original battery properly. It should not be thrown into a fire as the battery may explode if incinerated. It should not be left around where small children or pets might play with, or swallow it. If the battery is accidentally swallowed, contact a physician immediately.
17
MS3111M_112306.p65 | 17 |
23/11/2006, 10:44