4.) Press the OP/CL or 
OPEN/CLOSE button again to close the CD door.
The display will show “TOC READ” as the player reads the Table Of Contents on the disc.
NOTES:
•The reading time may be even longer if you are using
•The player ‘stops’after reading the the DISC 1 , and will not proceed to the DISC 2 or DISC 3.
•If there’s no disc in DISC 1, it will briefly show “NO DISC”, then proceed to the next DISC.
•If all 3 discs are loaded, you may press CD1, CD2, or CD3 button to select which disc to start playing first.
•After reading the disc, total Tracks and Playing Time will appear on the
display.
5.) Press the 
PLAY/PAUSE button to start playback.
The 
indicator appears in the display.
6.) When playback begins, adjust the VOLUME and EQ controls as desired.
7.) Playback will continue until all tracks on all discs have been played, then the player stops and the display shows the total tracks number and playing time on the last disc played.
To stop playback at any time, press the 
STOP or 
/BAND button.
8.) If you are finished listening, press the OP/CL or 
OPEN/CLOSE button to open the CD door, remove your discs from the player, 
STANDBY button to return the system to the Standby (Off) mode.
27
MS3111M_112306.p65 | 27 |