Programmed Playback
The Programmed Playback feature allows you to program a total of up to 20 tracks from a selected disc for playback in any desired order. You may program the same track to play several times within a program sequence if desired.
NOTE: You cannot program tracks during playback. If a disc is playing press the STOP or /BAND button first to stop playback before beginning the programming steps below.
1.) Press any of the CD 1, CD 2, or CD 3 button to select the disc you want to program and wait until the player has read the Table of Contents.
2.) Press the PROGRAM button on front panel or MEMO(PROG) button on remote control once.
The Track “00” flashes and MEMORY indicator, Program Memory “P01” appear.
3.) Press or buttons to select the first track on the disc to be programmed.
(Example: Track 07).
4.) Press the PROGRAM button on front panel or MEMO(PROG) button on remote control again. The Program Memory number advances to “P02”.
5.) Repeat steps 3 and 4 selecting the desired Track number each time until you have entered up to 20 tracks in the CD program memory.
6.) Press the PLAY/PAUSE button to begin programmed playback.
The MEMORY indicator remains. The player will play the track that you programmed in the desired sequence.
31
MS3111M_112306.p65 | 31 |
23/11/2006, 10:44