Viking VCWB301RSS, VCWB301LSS manual Wine Storage System, Shelf Removal, Loading the Shelves

Wine Storage System

CAUTION

To store magnum or oversized bottles, the shelf directly above must be removed. Failure to do so could result in bottle breakage. See “Shelf Removal” section for proper shelf removal.

Versatile Shelving System

Your wine cellar's shelving system makes it easy to store standard, magnum and half-size bottles easily. There are a total of fifteen wine shelves which will each accommodate 10 standard bottles of wine, alternately displayed. Two convertible wine shelves adjust to allow bottles to be displayed.

Loading the Shelves

To load a shelf, pull the shelf forward and place the bottles on the shelf with the neck in the center of the shelf. Alternate the direction of the next bottle. Note the illustration below for maximum bottle storage. Shelves may need to be removed to store some bottles.

Operation

Shelf Removal

CAUTION

Remove wine bottles from shelves before removing shelves. Failure to do so could result in bottle breakage.

To remove a wine shelf:

1) Pull the shelf forward until it is fully extended.

Wood

Front

2) Lift up the front of the shelf.

Operation

3) Remove from the glide.

To replace the shelf, line shelf up with glide, lower into place and push shelf back.

14 15