Cooktop Surfaces, Control Panel, Control Knobs

Cleaning and Maintenance

Cleaning Problems on Glass Ceramic Top (cont.)

Problem	Cause	To Prevent	To Remove
Metal	Sliding or scraping	DO NOT slide	Remove metal
markings	metal cookware	metal objects	marks before the
(silver/gray	on glass top.	across top.	glass top is used
marks)			again. Apply
			cleaning cream
			with a damp
			paper towel and
			scrub with a nylon
			scrub pad or
			brush. Rinse
			thoroughly and
			dry.
Hard water	Condensation	Make sure the	Mix cleaning
spots	from cooking may	bottom of	cream with water
	cause minerals	cookware is dry	and apply a thick
	found in water	before cooking.	paste to stained
	and acids to drip	Daily use of	area. Scrub
	on to glass top	cleaning cream will	vigorously. If stain
	and cause gray	help keep top free	is not removed,
	deposits (the	from hard water	reapply cleaner
	spots are often so	mineral deposits	and repeat
	thin they appear	and food	process. Also
	to be in the glass	discoloration.	try cleaning
	top).		procedure for
			smearing and
			streaking.

Pitting or	Boil over of sugar	Watch sugar and	Turn element to
flaking	syrup on glass top.	syrups carefully to	LO; use several
	This can cause	avoid boil overs.	paper towels to
	pitting if not		wipe the spill
	removed		immediately. Let
	immediately.		glass top cool and
			carefully scrape off
			remainder of burn-
			off with a single-
			edged razor blade
			held at a 30° angle.

Product Care

Cleaning and Maintenance

Cooktop Surfaces

Several different finishes have been used in your cooktop. Cleaning instructions for each surface are given below. NEVER USE AMMONIA, STEEL WOOL PADS OR ANY ABRASIVE CLOTHS AND MATERIALS SUCH AS CLEANSERS, OVEN CLEANERS, OR ABRASIVE POWDERS. THEY CAN PERMANENTLY DAMAGE YOUR COOKTOP.

Control Panel

DO NOT use any cleaners containing ammonia, abrasives or stainless steel cleaners on any surface that contains graphics. These products could remove the graphics from the control panel. Apply hot, soapy water to a soft clean cloth. DO NOT spray liquids directly onto the control panel.

Control Knobs

MAKE SURE ALL CONTROL KNOBS POINT TO THE “OFF” POSITION BEFORE REMOVING. Pull the knobs straight off. Wash in detergent and warm water. Dry completely and replace by pushing firmly onto stem.

Stainless Steel Parts

All stainless steel body parts should be wiped regularly with hot, soapy water at the end of each cooling period and with a liquid cleaner designed for that material when soapy water will not do the job. DO NOT use steel wool, abrasive cloths, cleansers, or powders. If necessary, scrape stainless steel to remove encrusted materials, soak the area with hot towels to loosen the material, then use a wooden or nylon spatula or scraper. DO NOT use a metal knife, spatula, or any other metal tool to scrape stainless steel. DO NOT permit citrus or tomato juice to remain on stainless steel surface, as citric acid will permanently discolor stainless steel. Wipe up any spills immediately.

CAUTION

To avoid the risk of property damage, DO NOT USE BRASS CLEANERS OR ABRASIVE CLEANERS ON ANY BRASS PARTS. All brass body parts should be wiped regularly with hot, soapy water and a soft, clean cloth. When hot, soapy water will not do the job, use every day household cleaners that are not abrasive.

Brass Parts

All special ordered brass parts are coated with an epoxy coating.

Product Care

F20528 specifications

The Viking F20528 is a versatile and robust solution in the realm of commercial vehicles, specifically designed for tough terrains and demanding operational environments. This vehicle encapsulates a blend of advanced technologies and practical features that make it ideal for a range of applications, from agricultural tasks to construction sites.

One of the key characteristics of the Viking F20528 is its powerful engine. Equipped with a high-performance diesel engine, it delivers impressive torque and horsepower, ensuring that it can handle heavy loads with ease. This engine is not only powerful but also designed for fuel efficiency, making the F20528 a cost-effective option for businesses looking to optimize their operating expenses.

The vehicle's robust chassis is engineered to withstand the rigors of heavy-duty tasks. With a high ground clearance and a reinforced frame, the F20528 is capable of traversing uneven terrains, whether it's muddy fields or rocky trails. This durability is further enhanced by its all-wheel-drive system, providing superior traction and stability in adverse conditions.

Another notable feature of the Viking F20528 is its advanced braking system. It comes equipped with hydraulic disc brakes that offer responsive stopping power, ensuring safety when operating in challenging environments. The vehicle also features an anti-lock braking system (ABS) that helps prevent skidding, providing peace of mind to operators.

In terms of technology, the F20528 is equipped with a user-friendly dashboard that includes an integrated infotainment system. This system offers GPS navigation, Bluetooth connectivity, and real-time vehicle diagnostics, enabling operators to stay connected and informed about the vehicle's performance. Additionally, it comes with multiple power outlets to support various equipment and tools, enhancing its versatility.

Comfort and ease of use are also priorities in the design of the Viking F20528. The spacious cabin is designed with ergonomic seating and ample legroom, ensuring that operators can work efficiently over extended periods. The vehicle's controls are intuitively laid out, making it accessible for operators of all skill levels.

Overall, the Viking F20528 stands out for its combination of power, durability, and technology. With features designed to enhance performance, safety, and operator comfort, it is a compelling choice for businesses looking to invest in a reliable and efficient commercial vehicle. Whether for agricultural use, construction, or other demanding tasks, the Viking F20528 proves to be an invaluable asset.