OPERATING YOUR BREVILLE VARIABLE TEMPERATURE KETTLE™
Before First Use
Remove and safely discard any packaging material or promotional labels attached to your kettle. It is recommended that before first use to fill the kettle to the maximum level with cold tap water, bring to the boil by selecting the BOIL 212° button, then discard the water. Your kettle will only operate when positioned on the power base. The kettle will automatically switch off when the water has reached the selected temperature.
Operation Of Your Kettle
1.To fill the kettle, remove the kettle from the power base and open the lid by pressing the lid release button. Fill with the desired amount of water. Always fill the kettle between the minimum (500) and maximum (MAX 1800) marks on the water window. Too little water will result in the kettle switching off before the water has boiled or reached the selected temperature.
2.Ensure the lid is closed and locked firmly into place. Position the kettle securely onto the power base. Insert the power plug into a 110/120V power outlet. The START/CANCEL and 212° BOIL button surrounds will illuminate in white for one minute. A beep will sound for two seconds. The START/CANCEL button surround will automatically switch off after one minute if not selected.
NOTE:
If the START/CANCEL button is pressed (before selecting a temperature button), the START /CANCEL button surround will illuminate in red and the 212º button surround will illuminate in white and the kettle will start heating.
3.Select the desired water temperature by pressing one of the five variable temperature buttons (175˚, 185˚, 195˚, 200˚, 212˚). The selected button and the START/ CANCEL button surround will illuminate in white.
NOTE:
The HOLD TEMP function can be selected before, during or on completion of the water heating cycle (refer page 9).
4.Press the START/CANCEL button and the surround will illuminate in red, the selected temperature button surround will illuminate in white and the kettle will start heating. Do not remove the kettle from the power base during operation. Ensure the kettle has switched off after the water has boiled or the selected temperature has been reached before removing the kettle from the power base. If the kettle is removed from the power base during the HOLD TEMP function the kettle will automatically switch off.
5.When the kettle has heated the water to the selected temperature, 3 beeps will sound, the START/CANCEL button surround illumination will switch off, and the selected temperature button surround will illuminate for 1 minute before switching off.
6.If the HOLD TEMP function has been selected, the HOLD TEMP button surround will remain illuminated in red, the selected temperature button surround will remain illuminated in white, and the kettle will continue to cycle on and off for 20 minutes.
7.If further heating of the kettle is not required, unplug the power cord and empty the water from the kettle. Replace the kettle onto the power base and close the lid.
15