Breville Recommends Safety First

We at Breville are very safety conscious and design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following instructions.

Important safeguards

Read all instructions

•Carefully read all instructions before operation and save for future reference.

•Remove and safely discard any packaging material and promotional labels before using the appliance for the first time.

•To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this appliance.

•This appliance has been designed specifically for the purpose of heating and boiling drinking quality water only. Under no circumstances should this product be used to heat or boil any other liquids or foodstuffs.

•Do not place the kettle near the edge of a bench or table during operation. Ensure that the surface is level, clean and free of water.

•Do not place the kettle on or near a hot gas burner, electric element or where it could touch a heated oven.

•Keep the kettle clear of walls, curtains and other heat or steam sensitive materials. Minimum 8 inch distance.

•Do not operate the kettle on a sink drain board.

•Always ensure the kettle is properly assembled before connecting to a power outlet and operating. Follow the instructions provided in this book.

•The kettle must be used only with the power base supplied.

•The kettle is not intended to be operated by means of an external timer or separate remote control system.

•Do not touch hot surfaces. Use the handle for lifting and carrying the kettle.

•Do not place anything on top of the lid.

•Always ensure the START/CANCEL button has been pressed to CANCEL, then remove the power plug from the power outlet before attempting to move the appliance, when the appliance is not in use and before cleaning and storing.

•Use caution when pouring water from the kettle, as boiling water and steam will scald. Do not pour the water too quickly.

•To protect against electric shock, do not immerse the kettle base, power base, power cord or power plug in water or allow moisture to come in contact with these parts.

•Do not remove the kettle from the power base during operation. Ensure the kettle has switched off after the water has boiled or reached the selected temperature, before removing the kettle from the power base. If the kettle is removed from the power base during the Hold Temp function, the kettle will automatically switch off.

•Do not move the appliance while it is switched on.