BEFORE FIRST USE
TIPS FOR OPTIMAL TEA BREWING
•Water quality affects taste. For best results, use fi ltered water.
•Finer tea particles and leaves will infuse more quickly than whole leaves. As a result, fi ner tea particles often release too much tannin too quickly, creating a harsher taste. Adjust the brewing time until desired strength is achieved.
•Using the tea scoop provided, spoon roughly one scoop of tea per cup / 8oz of water.
Water to Tea Scoop Ratio
Glass Jug | Cups / | Tea |
Marking | Ounces | Scoops |
|
|
|
500mL | Approx. | 2 Scoops |
| 2 Cups / 16oz |
|
|
|
|
750mL | Approx. | 3 Scoops |
| 3 Cups / 24oz |
|
|
|
|
1000mL | Approx. | 4 Scoops |
| 4 Cups / 32oz |
|
|
|
|
1200mL | Approx. | 5 Scoops |
| 5 Cups / 40oz |
|
|
|
|
PREPARING THE TEA MAKER FOR USE
In order to remove any dust or protective residues from the manufacturing process, it is recommended to run a boiling cycle then discard the water.
1.Remove and safely discard any packing material, promotional labels and tape from the Tea Maker.
2.Remove the Jug Lid then remove the Tea Basket from the magnetic post within the Glass Jug. Wash the Jug Lid, Tea Basket, Basket Lid and Tea Scoop in warm soapy water with a soft sponge, rinse and dry thoroughly.
!NEVER IMMERSE THE BASE OF THE GLASS JUG, THE POWER BASE, POWER CORD OR POWER PLUG IN WATER OR ALLOW MOISTURE TO COME IN CONTACT WITH THESE PARTS.
3.Place the Power Base on a fl at, dry surface.
4.Without the Tea Basket in place, fi ll the Glass Jug to the water maximum mark (1500mL WATER MAX) and place on the Power Base. Securely fi t the Jug Lid onto the Glass Jug.
!NEVER FILL THE GLASS JUG WITH CHILLED WATER. ALLOW THE TEA MAKER TO COOL BEFORE REFILLING.
BEFORE FIRST USE
!FILLING PAST THE 'MAX' LINE MAY RESULT IN SERIOUS BURNS OR INJURIES AS A RESULT OF OVERFLOWING HOT OR BOILING WATER. FILLING BELOW THE 'MIN' LINE WILL RESULT IN THE TEA MAKER SWITCHING OFF BEFORE THE WATER HAS BOILED OR REACHED THE SELECTED TEMPERATURE
5.Unwind the power cord completely and insert the power plug into a grounded wall outlet.
6.The LCD screen will illuminate with the default brew temperature and brew time display.
7.Press the left 
ARROW UP button until the LCD screen displays 212°F. The 'Custom' LED will automatically illuminate.
8.Press the HOT WATERCancel button to start the cycle. The button surround will illuminate and the LCD screen will display 'ON' and the
9.Once the water reaches 212°F, the tea alert will sound three times and the HOT WATERCancel button surround will cease to illuminate.
10.Discard the water. The Tea Maker is now ready to use.
12 |
|
|
|
| 13 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|