Operating your Breville Product
Getting started
ON OFF
The ON OFF button powers the unit into READY mode.
Ready mode
The blender will default to MANUAL.
Manual features
Speed control dial
There are 12 speed settings from STIR through to MILL.
STIR mixes more delicate foods with a slow stirring motion and light pausing to fold ingredients together.
MILL is the fastest setting, and is ideal for milling nuts, grains and seeds.
The blender is programmed to allow manual speeds to run for 3 minutes before automatically stopping.
PAUSE PLAY
Pauses and holds the speed and timer for up to 2 minutes. Press PAUSE PLAY again to resume.
Pause is also activated if the jug is removed from base during use. Replace jug, and press START to resume.
Repeat function
If the START button is pressed when using the manual speed dial, or if the timer finishes, the current speed setting will be held for 2 minutes to allow a quick repeat of the cycle.
Pressing the START button will
If you want to clear the previous speed from the memory, press and hold the START button for 2 seconds.
Sleep
After 2 minutes of inactivity, LCD powers off, and the ON OFF button flashes red. After 5 minutes of inactivity, the blender turns OFF completely. Press the ON OFF button to reactivate.
Count-up timer
If the timer isn’t set, the blender timer counts up in seconds as it blends. When using the timer this way, the blender will stop after 3 minutes, or you can cancel blending manually.
Count-down timer
The alternative to running the blender in
8