Grain Mill Attachment, Assembling Your Grain Mill

Grain Mill Attachment

The following attachment is designed to mill low-moisture, non-oily grains such as wheat, corn, rye, oats, rice, buckwheat, barley, and millet.

Grain Mill Body — serves as a hopper; guides grains into grinding burr

Grind Worm — drives grinding action

Movable Burr — grinds whole grains into flour

Adjustment Knob — adjusts the fineness of the grind

Cleaning Brush — use to clean burrs and other mill parts after use.

NOTE: Never immerse Grain Mill in water or other liquid. Never wash in dishwasher. For recommended cleaning methods, See Care and Cleaning section on page 8.

NOTE: The Grain Mill is designed to grind only low-moisture, non-oily grains. Do not grind peanuts, coffee beans, soybeans, or sunflower seeds with the Grain Mill; their high oil or high-moisture contents can damage the grinding mechanism.

DE F

A B C

Assembling Your Grain Mill

TO ASSEMBLE:

Insert the attachment power shaft (A) with the grind worm (B) and movable burr (C) into the grain mill body (D).

Mount the front plate (E) with adjustment knob (F) onto the front of the shaft. Turn and tighten screws into place.