ReplacingCooktopLight
The cooktop light consists of two 10W
3.For wall or roof venting, remove the vent deflector by removing the mounting screws (1 from each end), and lifting out the vent deflector.
ABC
To Replace:
1.Unplug microwave oven or disconnect power.
2.Remove bulb cover mounting screw, and gently open cover.
A B C
A. Mounting screw
B. Bulb cover lens
C. Halogen bulb
3.Remove the burned-out bulb.
4.Replace bulb, using a tissue or wearing clean cotton gloves to handle the bulb. Do not touch bulb with bare fingers.
5.Close bulb cover and replace mounting screw.
6.Plug in microwave oven or reconnect power.
ReplacingMicrowaveOvenLight
The microwave oven light is a 10W
To Replace:
1.Unplug microwave oven or disconnect power.
2.Gently pull vent screen rings and lift the screen off the exhaust vent at the top of the microwave oven.
If using recirculating exhaust venting, skip Step 3.
ABC
A. Vent screen
B.Rings
C.Bulb cover (under screen)
A. Bulb cover
B. Vent deflector
C. Vent deflector mounting screws (2)
4.Remove the bulb cover mounting screw, then lift cover.
A
A. Bulb cover mounting screw
5.Remove the
6.Replace bulb, using tissue or wearing clean cotton gloves to handle bulb. Do not touch bulb with bare fingers.
7.Close bulb cover, and fasten with screw.
If using recirculating exhaust venting, skip Step 8.
8.For wall or roof venting, replace the vent deflector removed in Step 3.
9.Replace vent screen.
10.Plug in microwave oven or reconnect power.
†®TORX is a registered trademark of Textron Innovations Inc.
33