PROGRAMMED PLAYBACK
You can program up to 20 tracks on a disc to play in any desired order. This allows you to omit the tracks you do not like, and have the tracks you do like play multiple times if desired.
NOTE: You cannot program the player during playback. If the disc is playing press the STOP 
button first and when the total tracks and playing time appear on the display follow the programming steps below.
1.) Press the MEMORY button on the front panel or on the remote control. The display will show Program Memory Number 01 (P – 01), Track Number 01, and the TRACK MEMORY indicator will be flashing.
2.) Press the 
or 
buttons to select the first track to be programmed. Example: Track Number 7.
3.) When the desired track number appears in the display press the MEMORY button again to enter the desired track in Program Memory Number 01. The Program Memory Number advances to
4.) Repeat steps 2 and 3, selecting a different track number each time until you have entered up to 20 tracks in the program memory.
After you have programmed the desired tracks press the PLAY/
PAUSE 
button to begin Programmed Playback. The MEMORY indicator stops flashing and remains ‘On’. The tracks you selected will be played in the desired order. After the last programmed track has played the player stops but the program remains in the memory.
1 8
ES11_ib022503.p65 | 18 |
25/2/2003, 16:05