Parts supplied for installation | KitchenAid 2003757 specs

Parts supplied for installation:

lbase grille

l miscellaneous parts bag

Check that all parts were included.

To prevent damage to product or floor covering:

l Do Not lower the refrigerator against the shipping base when removing the shipping base.

l Do Not remove protective film until refrigerator is in operating position.

l All four leveling legs must contact the floor to support and stabilize the full weight of the refrigerator.

l Keep cardboard shipping piece or plywood under refrigerator until it is installed in operating position.

1 Remove and save literature

. package and parts bag taped to refrigerator door. Remove four brackets (two on each side) attaching shipping base to refrigerator bottom.

Do Not remove tape and door bracing until product is secured in final location. See Page 3.

L.Place

appliance dolly under refrigerator

side and loosely

wrap dolly -C--.-

refrigerator.

Injury Hazard

Because of the weight and size of the refrigerator, two or more people are required to install it.

Most of the refrigerator’s weight is at the top. Extra care is needed when moving the refrigerator to prevent tipping.

Failure to follow these instructions could result in injury.

Place sections of shipping carton 3 . on the floor when rolling dolly and refrigerator into the house. Move refrigerator close to built-in opening.

Set’power

at top of cabinet to “OFF” position.

Plug power supply cord into grounded outlet. Install retainer on grounded outlet using screw from parts bag.

5 Place top of cardboard

. carton or plywood under refrigerator. Remove dolly. Open appliance doors and remove all boxes, parts packages and packing materials from refrigerator and freezer

compartments. Do Not remove protective film.

Move the refrigerator straight back and evenly into the opening. Check that:

l copper tubing is not kinked.

l power supply cord is on top of refrigerator next to cover.

compression	union	compression
nut		nut
L	l/4”	1
	(6 mm)
	sleeve

Slide a compression nut and sleeve on open end of each copper line. Use a copper tubing union to connect both copper lines. Do Not over-tighten.

Turn water supply valve to “OPEN” position. Turn refrigerator switch “ON.” Wait a few minutes. Check water line connection and water valve on top of cabinet for leaks. Without kinking the tubing, carefully place it back underneath cabinet.

Insert carton corner posts between strap and refrigerator at side trim pieces and handles. Carefully tighten strap making sure side trim and handles are protected.

Check that water supply line has been flushed. See Page 7.

Pull	copper	line	from refrigerator
6. water	valve	and	copper		line from
plumbing	forward	from		underneath
refrigerator.	Remove		cap	from	water line.

Page 8

2003757 specifications

The KitchenAid 2003757 stand mixer is a powerhouse of versatility and efficiency in the culinary world, making it a staple for both amateur cooks and seasoned chefs. Its iconic design and robust performance empower users to explore their culinary creativity with ease.

One of the standout features of the KitchenAid 2003757 is its powerful 10-speed motor. This allows for precise control over mixing, kneading, and beating tasks, ensuring that users achieve the perfect consistency for their recipes. With speeds ranging from a slow stir to a fast whip, it can handle anything from delicate meringues to heavy bread dough without straining.

The mixer's 4.5-quart stainless steel bowl is another highlight. It provides ample capacity for mixing large batches while its ergonomic handle ensures easy lifting and pouring. Additionally, the bowl is dishwasher safe, simplifying cleanup and maintenance for busy home cooks.

The KitchenAid 2003757 also features a unique planetary mixing action. As the beater spins on its own axis, it also rotates around the bowl’s perimeter, ensuring that all ingredients are thoroughly mixed. This comprehensive mixing technique minimizes the need for scraping down the bowl, saving time and effort during food preparation.

Another impressive characteristic is its versatility. The mixer comes with a flat beater, dough hook, and wire whip, catering to a diverse range of recipes. Additionally, it is compatible with numerous optional attachments, such as pasta makers, food grinders, and vegetable spiralizers, allowing it to transform into a multi-function kitchen appliance.

The KitchenAid 2003757 is designed with durability in mind. Its robust construction provides stability during operation, while its sleek design complements any kitchen decor. The available range of colors adds a touch of personal style, making it an attractive addition to the countertop.

Furthermore, safety features such as a locking head ensure that the mixer remains securely in place during operation, enhancing user safety. The inclusion of anti-slip feet contributes to stability, preventing any movement on the countertop.

In conclusion, the KitchenAid 2003757 stand mixer stands out with its powerful motor, thoughtful design, and versatile capabilities. It is an essential tool for anyone looking to elevate their cooking experience. Whether baking bread, whipping cream, or preparing family-sized meals, this mixer delivers reliability and performance, making it a worthy investment for any kitchen.