Installation Requirements, ToolsandParts

INSTALLATION REQUIREMENTS

ToolsandParts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed

■Level

■Drill 1¼" (3 cm) drill bit

■For chimney mounting brackets: ³⁄₃₂" (2.4 mm) drill bit if installing into wood.

■For range hood assembly mounting brackets: ¹⁄₈" (3 mm) drill bit if installing into wood.

■Pencil

■Wire stripper or utility knife

■Tape measure or ruler

■Pliers

■Caulking gun and weatherproof caulking compound

■Vent clamps

■Jigsaw or keyhole saw

■Flat-blade screwdriver

■Metal snips

■Phillips screwdriver

■Scissors

Parts needed

■Home power supply cable

■1 - ½" (12.7 mm) UL listed or CSA approved strain relief

■2 UL listed wire connectors

For vented installations, you will also need:

■1 wall or roof cap

■Metal vent system

For non-vented (recirculating) installations, you will also need:

■Chimney Kit Part Number 8212713 (Stainless Steel), 8212714 (White), or 8212715 (Black). See “Assistance or Service” section to order.

Parts supplied

Remove parts from packages. Check that all parts are included.

■2 metal grease filters for 30" (76.2 cm) models

3 metal grease filters for 36" (91.4 cm) models

■2 - chimney mounting brackets

■4 - #8 Phillips head chimney bracket mounting screws

■2 - #10 Phillips head range hood mounting screws

■6 - Chimney cover mounting screws

■Upper chimney cover

■Lower chimney cover

■Damper

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

Have a qualified technician install the range hood. It is the installer's responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located inside the range hood on the rear wall of the range hood.

Canopy range hood location should be away from strong draft areas, such as windows, doors and strong heating vents.

Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance.

Grounded electrical outlet is required. See “Electrical Requirements” section.

The canopy range hood is factory set for venting through the roof or wall. For non-vented (recirculating) Installation see “Non- vented (recirculating) Installations” in “Prepare Location” section. Charcoal Filter Kit Part Number 8285507 is available from your dealer or an authorized parts distributor.

All openings in ceiling and wall where canopy range hood will be installed must be sealed.

For Mobile Home Installations

The installation of this range hood must conform to the Manufactured Home Construction Safety Standards, Title 24 CFR, Part 328 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or when such standard is not applicable, the standard for Manufactured Home Installation 1982 (Manufactured Home Sites, Communities and Setups) ANSI A225.1/NFPA 501A*, or latest edition, or with local codes.

Product Dimensions

Vented Installations

10¹⁄₄" (26 cm)

11¹³⁄₁₆" (30 cm)

Min 27¹⁄₂" (69.8 cm) Max 36¹⁄₂" (92.7 cm)

21¹⁄₄" (54 cm)

1¹⁄₄"

(3.2 cm)

3¹⁵⁄₁₆"

(10 cm)

30" (76.2 cm)	22" (55.9 cm)
30" (76.2 cm)
36" (91.4 cm)

W10029780 specifications

The KitchenAid W10029780 is a versatile appliance part designed specifically for use with KitchenAid appliances, ensuring efficient performance and durability in the kitchen. This part is primarily known for its compatibility with a wide range of KitchenAid refrigerators, serving as a crucial element in maintaining the appliance's functionality.

One of the standout features of the KitchenAid W10029780 is its innovative design tailored to optimize cooling performance. By facilitating effective temperature control, this part helps maintain the ideal environment for food storage, contributing to the freshness and longevity of your perishables. The unit also benefits from robust construction materials that withstand the rigors of daily kitchen use, ensuring that it remains reliable for years.

In addition to its structural integrity, the W10029780 incorporates advanced technology aimed at minimizing energy consumption. This efficiency not only supports sustainable practices but also helps users save on energy costs. The part's design includes features that promote optimal airflow within the refrigerator, preventing cold spots and ensuring that all areas receive adequate cooling.

The ease of installation is another key characteristic of the KitchenAid W10029780. Homeowners and DIY enthusiasts can replace the part without the need for professional assistance, thanks to its straightforward design. Comprehensive installation instructions accompany the product, guiding users through the replacement process with clarity.

Furthermore, the KitchenAid W10029780 is also engineered for compatibility with various models of KitchenAid refrigerators, making it a versatile choice for those looking to maintain their kitchen appliances. The part's reliability has earned it positive reviews from customers who appreciate its seamless integration into their existing kitchen setups.

In conclusion, the KitchenAid W10029780 stands out as a vital component for those looking to enhance their refrigerator's efficiency and longevity. With its emphasis on cooling performance, energy efficiency, user-friendly installation, and compatibility with various models, this part exemplifies the brand's commitment to quality and customer satisfaction. Whether you are a seasoned chef or a casual home cook, the KitchenAid W10029780 is likely to meet your appliance maintenance needs effectively.