KitchenAid Ventilation Hood installation instructions Cleaning, Accessories

Page 11

5.Push down and twist to remove the fuse cover.

6.Replace the fuse with a new 5 amp time-delay fuse.

7.Replace the fuse cover.

8.Replace the fuse holder assembly cover with the 2 screws removed earlier.

9.Reconnect power at the circuit breaker of fused circuit box.

Cleaning

Exterior surfaces:

Do not use steel wool or soap-filled scouring pads. Rub in direction of the grain line to avoid scratching the surface.

Always wipe dry to avoid water marks.

KitchenAid® Stainless Steel Cleaner/Polish or Stainless Steel Wipes are the cleaners recommended for cleaning stainless steel surfaces on this product. To order call our Customer Service Center at 1-800-442-9991 or order on-line at www.applianceaccessories.com and ask for part number 4396920 (cleaner/polish) or 8212510 (wipes). To order from Canada, call 1-800-807-6777.

Mild liquid detergent and water.

Wipe with damp soft cloth or nonabrasive sponge, then rinse with clean water and wipe dry.

Metal Filters

Use 2 hands to remove filters. Push tab back to release locking pin, pull down and forward. Repeat with other filter.

Wash metal filters as needed in dishwasher or hot detergent solution to clean.

Reinstall metal filter by placing the back edge of filter into channel at rear of hood. Push filter up while pushing tab back. When filter is in place, release tab. Locking pin will hold filter in place.

Recirculating Installation Filters:

Do not wash charcoal filter packs. Replace with Recirculation Kit Part Number 4396565.

Remove the old charcoal filter:

1.Rotate to the left (counterclockwise) and pull away from the blower cover and discard filter pack. Repeat for other filter.

2.Place the charcoal filter against the blower cover and rotate to the right (clockwise) to attach to cover.

A

A.Filter

3.Reinstall metal filter by placing the back edge of filter into channel at rear of hood. Push filter up while pushing tab back. When filter is in place, release tab. Locking pin will hold filter in place.

Accessories

Optional installation kits are available from your dealer.

Recirculation Kit Part Number 4396565 includes 2 charcoal filter packs and vent cover.

INTERCHANGEABLE FRONT TRIM

PART NO.

Architect® Series - 30” Trim Kit

 

 

Stainless Steel

8212621

 

 

 

 

White

8212462

 

 

 

 

Black

8212463

 

Biscuit

8212461

 

Architect® Series II - 30” Trim Kit

 

 

White

8212623

 

 

 

 

Black

8212624

 

 

 

 

Biscuit

8212622

 

Pro Line® Series - 30” Trim Kit

 

 

Stainless Steel

8212464

 

 

 

 

Meteorite

8212465

 

 

 

 

Architect® Series - 36” Trim Kit

 

 

Stainless Steel

8212625

 

 

 

 

White

8212467

 

 

 

 

Black

8212468

 

 

 

 

Biscuit

8212466

 

Architect® Series II - 36” Trim Kit

 

 

White

8212627

 

 

 

 

Black

8212628

 

 

 

 

Biscuit

8212626

 

Pro Line® Series - 36” Trim Kit

 

 

Stainless Steel

8212469

 

Meteorite

8212470

 

 

 

 

11

Image 11
Contents 9763384 Rev. A1 Avec garniture de façade interchangeableTable of Contents Range Hood SafetyTools and Parts Installation RequirementsVent and electrical openings and mounting screw locations Product dimensionsLocation Requirements Venting RequirementsExample vent system Electrical RequirementsVenting methods Calculating Vent System LengthPrepare Location Installation InstructionsVenting Options Change Hood to Optional Rear Exhaust Cut a 1¹⁄₄ 3.2 cm hole for power supply cableMake Electrical Connection Install Range HoodInterchangeable Front Trim Install FiltersCheck Operation Replacing Hood Lamps Fuse Range Hood LampsRange Hood Controls Accessories CleaningOur consultants provide assistance with Requesting Assistance or ServiceU.S.A CanadaDisclaimer of Implied Warranties Limitation of Remedies Kitchenaid Ventilation WarrantyONE Year Limited Warranty Items Kitchenaid will not PAY forSlide Switches Wiring DiagramVotre sécurité et celle des autres est très importante Sécurité DE LA Hotte DE CuisinièreConservez CES Instructions Outillage et pièces Exigences DinstallationExigences demplacement Dimensions du produitMéthodes dévacuation Exigences concernant lévacuationDégagements de séparation à respecter Longueur maximum = 35 pi 10,7 m Spécifications électriquesCalcul de la longueur effective du circuit dévacuation Décharge à travers le soffite Instructions DinstallationPréparation de l’emplacement Instructions généralesMoteur du ventilateur Vis Raccordement électrique Installation de la hotte de cuisinièrePièce n Installation des filtresContrôle du fonctionnement Garniture Avant InterchangeableLampes de la hotte de cuisinière Commandes de la hotte de cuisinièreDE Cuisinière Entretien DE LA Hotte DE CuisinièreFiltres métalliques Filtres pour installation avec recyclageNettoyage Surfaces externesAccessoires Assistance OU ServiceKitchenaid NE Prendra PAS EN Charge GarantiedusystèmedeventilationkitchenaidGarantie Limitée DE UN AN 9763384 Rev. a Schéma DE Câblage
Related manuals
Manual 1 pages 33.27 Kb

Ventilation Hood specifications

The KitchenAid Ventilation Hood is a premium kitchen accessory designed to enhance your cooking experience while ensuring a clean and pleasant environment in your kitchen. This essential appliance combines aesthetics with functionality, making it not only a practical component of your culinary space but also an elegant fixture that complements your kitchen design.

One of the standout features of the KitchenAid Ventilation Hood is its powerful ventilation system. With a range of CFM (cubic feet per minute) options, these hoods effectively capture smoke, steam, and cooking odors, ensuring that your kitchen remains fresh during and after meal preparation. The three-speed blower allows you to choose the perfect level of air circulation based on the intensity of your cooking, providing flexibility to match your culinary needs.

In addition to its efficiency, the KitchenAid Ventilation Hood is designed with a sleek and modern aesthetic. The stainless steel finish not only gives it a professional appearance but also ensures durability and easy maintenance. The hood is available in various styles, including wall-mounted, under-cabinet, and island configurations, allowing you to select the perfect model that fits both your kitchen layout and personal taste.

Technological innovations enhance the user experience as well. Many KitchenAid Ventilation Hoods come equipped with LED lighting, which illuminates your cooking surface effectively, enhancing visibility. This energy-efficient lighting is designed to last longer than traditional bulbs, reducing the frequency of replacements while providing bright, even illumination.

Moreover, these hoods often feature dishwasher-safe filters, making cleanup straightforward. The filters are designed specifically to capture grease and other particulates, ensuring optimal performance and longevity of your appliance. Some models also incorporate charcoal filters, which assist in reducing odors even further, perfect for kitchens that frequently prepare aromatic dishes.

Noise levels are another concern with ventilation hoods, but KitchenAid addresses this with its Quiet-Efficient Ventilation Technology. This feature ensures that even at higher speeds, the hood operates more quietly, allowing for an enjoyable cooking environment without overwhelming noise.

In summary, the KitchenAid Ventilation Hood is a perfect blend of style, efficiency, and advanced technology. With its powerful ventilation capabilities, aesthetic appeal, user-friendly features, and quiet operation, it is an ideal addition to any kitchen, promising both functionality and elegance to enhance your culinary endeavors.