AdjustLevelingLegs

1.If range height adjustment is necessary, use a wrench or pliers to loosen the 4 leveling legs.

This may be done with the range on its back or with the range supported on 2 legs after the range has been placed back to a standing position.

NOTE: To place range back up into a standing position, put a sheet of cardboard or hardboard in front of range. Using 2 or more people, stand range back up onto the cardboard or hardboard.

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

Failure to follow these instructions can result in death or serious burns to children and adults.

2.Adjust the leveling legs to the correct height. Leveling legs can be loosened to add up to a maximum of 1" (2.5 cm). A minimum of ³⁄₁₆" (5 mm) is needed to engage the anti-tip bracket.

NOTE: If height adjustment is made when range is standing, tilt the range back to adjust the front legs, then tilt forward to adjust the rear legs.

3.When the range is at the correct height, check that there is adequate clearance under the range for the anti-tip bracket. Before sliding range into its final location, check that the anti- tip bracket will slide under the range and onto the rear leveling leg prior to anti-tip bracket installation.

InstallAnti-TipBracket

Contact a qualified floor covering installer for the best procedure for drilling mounting holes through your type of floor covering.

Before moving range, slide range onto shipping base, cardboard or hardboard.

1.Remove template from the anti-tip bracket kit (found inside the oven cavity) or from the back of this manual.

2.Place template on the floor in cabinet opening so that the left edge is against cabinet and top edge is against rear wall, molding or cabinet.

3.Tape template into place.

4.If countertop is not flush with cabinet opening edge, align template with overhang.

If cabinet opening is wider than that specified in the “Location Requirements” section, adjust template so range will be centered in cabinet opening.

5.To mount anti-tip bracket to wood floor, drill two ¹⁄₈" (3.2 mm) holes at the positions marked on the bracket template. Remove template from floor.

To mount anti-tip bracket to concrete or ceramic floor, use a ³⁄₁₆" (4.8 mm) masonry drill bit to drill 2 holes at the positions marked on the bracket template. Remove template from floor.

6.Tap plastic anchors into holes with a hammer.

7.Align anti-tip bracket holes with holes in floor. Fasten anti-tip bracket with screws provided.

Depending on the thickness of your flooring, longer screws may be necessary to anchor the bracket to the subfloor. Longer screws are available from your local hardware store.

8.Move range close enough to opening to allow for final electrical connection. Remove shipping base, cardboard or hardboard from under range.

9.Move range into its final location making sure rear leveling leg slides into anti-tip bracket.

10.If installing the range in a mobile home, you must secure the range to the floor. Any method of securing the range is adequate as long as it conforms to the standards in the “Location Requirements” section.

11.Continue installing your range using the following installation instructions.

DUALFUEL RANGES specifications

KitchenAid DUALFUEL RANGES are designed to offer a seamless fusion of gas and electric cooking technologies, providing home chefs with the best of both worlds. These ranges combine powerful gas burners for precise cooking control with the consistent and even heating of an electric oven, making them ideal for a variety of culinary tasks.

One of the standout features of KitchenAid DUALFUEL RANGES is the gas burners equipped with high BTU output. This ensures rapid heat-up times, allowing users to achieve high heat for searing meats or quickly boiling water. The burners are also designed with precise simmer settings, perfect for delicate sauces and melting chocolate without risk of burning. Additionally, the range often includes a removable burner cap, making it easier to clean.

The electric ovens in these ranges offer sophisticated baking capabilities through their Even-Heat technology. This feature ensures that every inch of the oven is heated consistently, providing optimal baking results, whether you’re baking a soufflé or roasting vegetables. Some models also come with a convection option, which circulates air for quicker, more uniform cooking, and browning. This can greatly enhance the results for baked goods, ensuring that cookies and cakes rise perfectly every time.

Another notable characteristic of KitchenAid DUALFUEL RANGES is the inclusion of an integrated temperature probe. This handy tool allows chefs to monitor the internal temperature of their dishes without opening the oven door, ensuring perfectly cooked meat every time while conserving energy and maintaining optimal heat levels.

Ease of use and elegant design are also hallmarks of KitchenAid DUALFUEL RANGES. With an intuitive control panel, backlit knobs, and sleek stainless-steel finishes, these ranges add a touch of sophistication to any kitchen. Many models also feature self-cleaning options that simplify maintenance, allowing homeowners to spend less time scrubbing and more time enjoying their culinary creations.

In summary, KitchenAid DUALFUEL RANGES deliver exceptional cooking performance through their powerful gas burners and innovative electric ovens. With features like Even-Heat technology, precise controls, a built-in temperature probe, and easy maintenance, these ranges represent a perfect blend of functionality and style, making them an excellent choice for both home cooks and culinary enthusiasts.