Attach Mounting Plate to Wall

NOTE: Secure the mounting plate to the wall at both bottom corner holes drilled into the wall studs and/or drywall using either 1/4-20 x 3" round-head bolts and toggle nuts or 1/4 x 2" lag screws.

Refer to illustrations in “Possible Wall Stud Configurations” in “Locate Wall Stud(s)” section.

No Wall Studs at Corner Holes (Figures 1 & 2)

NOTE: The mounting plate must be secured to the wall on at least 1 wall stud as well as at both bottom corners.

1.With the support tabs of the mounting plate facing forward, insert 1/4-20 x 3" round-head bolts through both bottom corner holes of mounting plate.

2.Start toggle nuts on bolts from the back of the mounting plate. Leave enough space for the toggle nuts to go through the wall and to open.

A. 1/4-20 x 3" round-head bolt

B. Mounting plate

C. Spring toggle nut

3.Position mounting plate on the wall, making sure that the top of the mounting plate is aligned with the front edge of the upper cabinet.

4.Push the 2 bolts with toggle nuts through the drywall, and finger tighten the bolts to make sure toggle nuts have opened against drywall.

A. 1/4-20 x 3" round-head bolt

B. Mounting plate

C.Drywall

D.Spring toggle nut

5.Insert lag screw(s) into the holes drilled into wall stud(s) in Step 2 of “Installation for No Wall Studs at Corner Holes” in the “Drill Holes in Rear Wall” section.

6.Check alignment of mounting plate, making sure it is level.

7.Securely tighten all lag screws and bolts.

Wall Stud at One Corner Hole (Figure 3)

1.With the support tabs of the mounting plate facing forward, insert a 1/4-20 x 3" round-head bolt through the corner hole that fits over the 3/4" (19 mm) hole drilled in Step 3 of “Installation for Wall Stud at One Corner Hole” in the “Drill Holes in Rear Wall” section.

2.Start a toggle nut on the bolt from the back of the mounting plate. Leave enough space for the toggle nut to go through the wall and to open.

3.Position mounting plate on the wall, making sure that the top of the mounting plate is aligned with the front edge of the upper cabinet.

4.Push the bolt with toggle nut through the drywall, and finger tighten the bolt to make sure toggle nut has opened against drywall.

5.Insert a lag screw into the remaining bottom corner hole.

6.If installing on a second wall stud, insert a lag screw into the other hole drilled in Step 2 of “Installation for Wall Stud at One Corner Hole” in the “Drill Holes in Rear Wall” section.

7.Check alignment of mounting plate, making sure it is level.

8.Securely tighten the lag screw(s) and bolt.

Wall Studs at Both Corner Holes (Figure 4)

1.Position mounting plate on the wall, making sure that the top of the mounting plate is aligned with the front edge of the upper cabinet.

2.Insert lag screws into both bottom corner holes.

3.Check alignment of mounting plate, making sure it is level.

4.Securely tighten the lag screws.

Prepare Upper Cabinet

1.Disconnect power to outlet.

2.Remove all contents from upper cabinet.

3.Place Upper Cabinet Template against the bottom of the upper cabinet, and tape or tack it in place. Make sure the template centerline aligns with the vertical centerline on the rear wall.

The “rear wall” arrows must be against the rear wall so that the holes cut into the upper cabinet align with the holes in the top of the microwave oven.

NOTE: If the upper cabinet has a frame around it, trim the template edges so that it fits inside the frame, against the upper cabinet bottom. The template has trim lines to use as guides.

4.Make sure the 10¹⁄₂" (26.7 cm) dimension from the rear wall to points “D” and “E” on the template is maintained.

Upper-cabinet template
D		E
10¹⁄₂"		10¹⁄₂"
(26.7 cm)	F	(26.7 cm)
	F	G
		G

W10189719A, W10190015A specifications

KitchenAid has long been synonymous with quality and innovation in kitchen appliances, and the W10190015A and W10189719A models are no exception. These products exemplify the brand's commitment to delivering exceptional performance and user-friendly features, making them essential tools for both amateur and professional chefs.

The W10190015A is primarily known as a replacement part for certain KitchenAid appliances, including various models of dishwashers. This component focuses on ensuring optimal performance and longevity of the appliance, featuring robust design characteristics that meet high standards of durability. Its compatibility with a wide range of KitchenAid dishwasher models means that users can easily find a suitable replacement without worrying about fitment issues. The installation process is designed to be straightforward, empowering DIY enthusiasts to tackle repairs without the need for professional assistance.

Conversely, the W10189719A is often noted for its role in enhancing the functionality of KitchenAid refrigerators. This part typically focuses on water filtration, ensuring that the water dispensed from the refrigerator is clean and free from impurities. With a high filtration capacity, it efficiently removes contaminants, providing peace of mind for families who rely on their refrigerator for both drinking water and ice-making capabilities. The W10189719A is designed for easy replacement, ensuring that users can maintain their refrigerator's performance without hassle.

Both products benefit from KitchenAid's commitment to quality engineering, ensuring that they not only perform well but also stand the test of time. The brand's adherence to rigorous testing standards means that users can trust these components to deliver consistent results, whether in terms of cleaning performance in dishwashers or water quality in refrigerators.

In addition to their practical features, these models reflect KitchenAid’s aesthetic sensibilities, blending seamlessly into the modern kitchen environment. The sleek design and attention to detail serve to complement the overall elegance of KitchenAid appliances, making them not only functional but also visually appealing.

In summary, the KitchenAid W10190015A and W10189719A are exemplary parts that embody the brand's dedication to quality, performance, and user satisfaction. Whether it's ensuring your dishwasher runs efficiently or providing purified water from your refrigerator, these components are integral to maintaining the high standards that KitchenAid has set in the kitchen appliance market.