KitchenAid W10189719A, W10190015A installation instructions Microwave Hood Combination Safety

Page 1

MICROWAVE HOOD COMBINATION

INSTALLATION INSTRUCTIONS

This product is suitable for use above electric or gas cooking products up to and including 36" (91.4 cm) wide. For gas cooktop, we recommend that the combined cooking surface rating does not exceed 55,000 BTU/hr. See “Installation Requirements” section for further notes.

These installation instructions cover different models. The appearance of your particular model may differ slightly from the illustration in these installation instructions.

Table of Contents

 

MICROWAVE HOOD COMBINATION SAFETY

1

INSTALLATION REQUIREMENTS

2

Tools and Parts

2

Location Requirements

2

Product Dimensions

3

Electrical Requirements

3

INSTALLATION INSTRUCTIONS

4

Remove Mounting Plate

4

Convert Microwave Oven to External Venting

4

Locate Wall Stud(s)

6

Mark Rear Wall

7

Drill Holes in Rear Wall

7

Attach Mounting Plate to Wall

8

Prepare Upper Cabinet

8

Install the Microwave Oven

9

Complete Installation

10

VENTING DESIGN SPECIFICATIONS

11

ASSISTANCE

12

Replacement Parts

12

MICROWAVE HOOD COMBINATION SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:

DANGER

WARNING

You can be killed or seriously injured if you don't immediately follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

W10189719A

Image 1
Contents Microwave Hood Combination Safety Microwave Hood Combination Installation InstructionsTools and Parts Installation RequirementsLocation Requirements Installation Dimensions Product DimensionsElectrical Requirements RequiredTo Install Vent Deflector Installation InstructionsRemove Mounting Plate Convert Microwave Oven to External VentingC D Locate Wall Studs Possible Wall Stud ConfigurationsDrill Holes in Rear Wall Mark Rear WallPrepare Upper Cabinet Attach Mounting Plate to WallNo Wall Studs at Corner Holes Figures 1 Wall Stud at One Corner Hole FigureFor Roof Venting Installation Only Install the Microwave OvenComplete Installation For optimal venting installation, we recommend Venting Design SpecificationsRectangular to Round Transition Recommended Standard FittingsAssistance Replacement PartsRecommended Vent Length ¹⁄₄ x 10 8.3 x 25.4 cm vent system = 73 ft 22.2 m total

W10189719A, W10190015A specifications

KitchenAid has long been synonymous with quality and innovation in kitchen appliances, and the W10190015A and W10189719A models are no exception. These products exemplify the brand's commitment to delivering exceptional performance and user-friendly features, making them essential tools for both amateur and professional chefs.

The W10190015A is primarily known as a replacement part for certain KitchenAid appliances, including various models of dishwashers. This component focuses on ensuring optimal performance and longevity of the appliance, featuring robust design characteristics that meet high standards of durability. Its compatibility with a wide range of KitchenAid dishwasher models means that users can easily find a suitable replacement without worrying about fitment issues. The installation process is designed to be straightforward, empowering DIY enthusiasts to tackle repairs without the need for professional assistance.

Conversely, the W10189719A is often noted for its role in enhancing the functionality of KitchenAid refrigerators. This part typically focuses on water filtration, ensuring that the water dispensed from the refrigerator is clean and free from impurities. With a high filtration capacity, it efficiently removes contaminants, providing peace of mind for families who rely on their refrigerator for both drinking water and ice-making capabilities. The W10189719A is designed for easy replacement, ensuring that users can maintain their refrigerator's performance without hassle.

Both products benefit from KitchenAid's commitment to quality engineering, ensuring that they not only perform well but also stand the test of time. The brand's adherence to rigorous testing standards means that users can trust these components to deliver consistent results, whether in terms of cleaning performance in dishwashers or water quality in refrigerators.

In addition to their practical features, these models reflect KitchenAid’s aesthetic sensibilities, blending seamlessly into the modern kitchen environment. The sleek design and attention to detail serve to complement the overall elegance of KitchenAid appliances, making them not only functional but also visually appealing.

In summary, the KitchenAid W10190015A and W10189719A are exemplary parts that embody the brand's dedication to quality, performance, and user satisfaction. Whether it's ensuring your dishwasher runs efficiently or providing purified water from your refrigerator, these components are integral to maintaining the high standards that KitchenAid has set in the kitchen appliance market.