KitchenAid W10190015A Installation Instructions, Remove Mounting Plate, To Install Vent Deflector

Page 4

INSTALLATION INSTRUCTIONS

Remove Mounting Plate

NOTE: To avoid possible damage to the work surface, cover the work surface.

1.Remove any remaining contents from the microwave oven cavity.

2.Remove the mounting plate by peeling off the strips of tape that attach it to the back of the microwave oven, and set the mounting plate aside.

ABC

A. Mounting plate

B. Back of microwave oven

C. Tape (multiple locations)

3.Tape the microwave oven door closed so that door does not swing open while the microwave oven is being handled.

NOTE: To avoid damage to the microwave oven, do not grip or use the door or door handle while the microwave oven is being handled.

Convert Microwave Oven to

External Venting

(for wall or roof venting only)

The microwave oven is set for recirculation installation. For wall or roof venting, changes must be made to the venting system. See “Venting Design Specifications” section.

NOTE: Skip this section if you are using recirculation installation. Keep the damper assembly in case the venting method is changed, or the microwave oven is reinstalled in another location where wall or roof venting may be used.

To prepare the microwave oven for wall or roof venting, the vent deflector (L-shaped metal bar) must be installed, and the appropriate damper vent opening must be uncovered.

To Install Vent Deflector:

1.Gently pull the rings and lift vent screen from the top of the microwave oven.

A

BC

A.Top of microwave oven

B.Vent screen

C.Rings

2.With vent deflector oriented as shown (wide side down), slide it back and under the back edge of the vent opening.

A B

A. Vent opening

B. Vent deflector

3.When the vent deflector is as far back as it can easily slide, flip it so that the wide side is to the back of the microwave oven, and the narrow side (with holes) is down. The vent deflector

4

Image 4
Contents Microwave Hood Combination Installation Instructions Microwave Hood Combination SafetyTools and Parts Installation RequirementsLocation Requirements Product Dimensions Installation DimensionsElectrical Requirements RequiredInstallation Instructions To Install Vent DeflectorRemove Mounting Plate Convert Microwave Oven to External VentingC D Possible Wall Stud Configurations Locate Wall StudsMark Rear Wall Drill Holes in Rear WallAttach Mounting Plate to Wall Prepare Upper CabinetNo Wall Studs at Corner Holes Figures 1 Wall Stud at One Corner Hole FigureInstall the Microwave Oven For Roof Venting Installation OnlyComplete Installation Venting Design Specifications For optimal venting installation, we recommendRectangular to Round Transition Recommended Standard FittingsReplacement Parts AssistanceRecommended Vent Length ¹⁄₄ x 10 8.3 x 25.4 cm vent system = 73 ft 22.2 m total

W10189719A, W10190015A specifications

KitchenAid has long been synonymous with quality and innovation in kitchen appliances, and the W10190015A and W10189719A models are no exception. These products exemplify the brand's commitment to delivering exceptional performance and user-friendly features, making them essential tools for both amateur and professional chefs.

The W10190015A is primarily known as a replacement part for certain KitchenAid appliances, including various models of dishwashers. This component focuses on ensuring optimal performance and longevity of the appliance, featuring robust design characteristics that meet high standards of durability. Its compatibility with a wide range of KitchenAid dishwasher models means that users can easily find a suitable replacement without worrying about fitment issues. The installation process is designed to be straightforward, empowering DIY enthusiasts to tackle repairs without the need for professional assistance.

Conversely, the W10189719A is often noted for its role in enhancing the functionality of KitchenAid refrigerators. This part typically focuses on water filtration, ensuring that the water dispensed from the refrigerator is clean and free from impurities. With a high filtration capacity, it efficiently removes contaminants, providing peace of mind for families who rely on their refrigerator for both drinking water and ice-making capabilities. The W10189719A is designed for easy replacement, ensuring that users can maintain their refrigerator's performance without hassle.

Both products benefit from KitchenAid's commitment to quality engineering, ensuring that they not only perform well but also stand the test of time. The brand's adherence to rigorous testing standards means that users can trust these components to deliver consistent results, whether in terms of cleaning performance in dishwashers or water quality in refrigerators.

In addition to their practical features, these models reflect KitchenAid’s aesthetic sensibilities, blending seamlessly into the modern kitchen environment. The sleek design and attention to detail serve to complement the overall elegance of KitchenAid appliances, making them not only functional but also visually appealing.

In summary, the KitchenAid W10190015A and W10189719A are exemplary parts that embody the brand's dedication to quality, performance, and user satisfaction. Whether it's ensuring your dishwasher runs efficiently or providing purified water from your refrigerator, these components are integral to maintaining the high standards that KitchenAid has set in the kitchen appliance market.