KitchenAid W10206425A ICE Maker USE, Normal Sounds, How Your Ice Maker Works, Ice Making Process

Page 8

Normal Sounds

Your new ice maker may make sounds that are not familiar to you. Because the sounds are new to you, you might be concerned about them. Most of the new sounds are normal. Hard surfaces such as floors, walls and cabinets can make the sounds seem louder than they actually are. The following describes the kinds of sounds that might be new to you and what may be making them.

■You will hear a buzzing sound when the water valve opens to fill the water reservoir for each cycle.

■Rattling noises may come from the flow of the refrigerant or the water line. Items stored on top of the ice maker can also make noises.

■The high-efficiency compressor may make a pulsating or high pitched sound.

■Water running over the evaporator plate may make a splashing sound.

■Water running from the evaporator plate to the water reservoir may make a splashing sound.

■As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing in your ice maker.

■You may hear air being forced over the condenser by the condenser fan.

■During the harvest cycle, you may hear a “thud” when the ice sheet slides from the evaporator onto the cutter grid.

■When you first start the ice maker, you may hear water running continuously. The ice maker is programmed to run a rinse cycle before it begins to make ice.

ICE MAKER USE

How Your Ice Maker Works

When you first start your ice maker, the water pan will fill and the system will rinse itself before starting to make ice. The rinsing process takes about 5 minutes.

Under normal operating conditions, the ice maker will cycle at preset temperatures. The ice level sensor located in the ice storage bin will monitor the ice levels.

IMPORTANT:

■If the water supply to the ice maker is turned off, be sure to set the ice maker control to OFF.

■The ice maker is designed to make clear ice from the majority of water sources on a daily basis. If your results are unsatisfactory, your water may need to be filtered or treated.

The Ice Making Process

1.Water is constantly circulated over a freezing plate. As the water freezes into ice, the minerals in the water are rejected. This produces a sheet of ice with a low mineral content.

2.When the desired thickness is reached, the ice sheet is released and slides onto a cutter grid. The grid divides the sheet into individual cubes.

3.The water containing the rejected minerals is drained after each freezing cycle.

4.Fresh water enters the machine for the next ice making cycle.

5.Cubes fall into the storage bin. When the bin is full, the ice maker shuts off automatically and restarts when more ice is needed. The ice bin is not refrigerated, and some melting will occur. The amount of melting varies with room temperature.

NOTE: As the room and water temperatures vary, so will the amount of ice produced and stored. This means that higher operating temperatures result in reduced ice production.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents ICE Maker Table of Contents Table DES MatièresICE Maker Safety Your safety and the safety of others are very importantInstallation Instructions Cleaning Before UseUnpack the Ice Maker Location RequirementsElectrical Requirements Water Supply RequirementsLeveling Recommended grounding methodRear View Connecting the Water LineConnect Water Supply Connecting the Drain Drain ConnectionGravity Drain System Drain Pump System on some modelsICE Maker USE Normal SoundsHow Your Ice Maker Works Ice Making ProcessICE Maker Care Using the ControlsCleaning Dirty or clogged condenser CondenserInterior Components To shut down the ice maker For ice makers with a drain pump installedVacation and Moving Care Ice Production TroubleshootingIce Maker Operation Plumbing Problems Ice QualityAssistance or Service If you need replacement partsU.S.A CanadaKitchenaid ICE Maker Warranty Limited WarrantyItems Excluded from Warranty This limited warranty does not coverPage Sécurité DE LA Machine À Glaçons Votre sécurité et celle des autres est très importanteInstructions D’INSTALLATION Emplacement d’installationDéballage de la machine à glaçons Enlèvement des matériaux d’emballageMéthode de mise à la terre recommandée Spécifications électriquesSpécifications de l’alimentation en eau NivellementRaccordement à la canalisation d’eau Raccordement du tuyau d’eauRaccordement au conduit dévacuation Système de vidange par gravitéVUE Arrière VUE LatéraleRaccordement du conduit dévacuation Sons normauxSystème à pompe de vidange sur certains modèles Utilisation des commandes Holiday Mode mode vacancesUtilisation DE LA Machine À Glaçons Fonctionnement de la machine à glaçonsEntretien DE LA Machine À Glaçons NettoyageUn condenseur sale ou obstrué CondenseurComposants intérieurs Précautions à prendre pour les vacances Ou le déménagement Arrêt de la machine à glaçonsDépannage La machine à glaçons ne fonctionne pasLa machine à glaçons semble bruyante Machine à glaçons avec pompe de vidangeProblèmes de plomberie Production de glaçonsQualité des glaçons Assistance OU Service Si vous avez besoin de pièces de rechangePour plus d’assistance Nos consultants fournissent l’assistance pourGarantie DE LA Machine À Glaçons Kitchenaid Garantie LimitéeÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasPage W10206425A All rights reserved

W10206425A specifications

The KitchenAid W10206425A is a versatile and essential component in many kitchens, known for its functionality and advanced features. This refrigerator water filter is designed specifically for various KitchenAid refrigerator models, ensuring that you have access to clean, great-tasting drinking water and ice.

One of the main features of the W10206425A filter is its advanced filtration technology. This filter effectively reduces impurities and contaminants from your water, including chlorine taste and odor, lead, mercury, and various other harmful substances. This not only enhances the quality of your drinking water but also contributes to the safety and overall health of your family.

A distinctive characteristic of the W10206425A is its easy installation process. Designed with user convenience in mind, this filter can be replaced without requiring any special tools or complicated procedures. This means that homeowners can easily swap out old filters for new ones, promoting regular maintenance of their refrigerator's water system. Additionally, it is recommended to replace the filter approximately every six months to ensure continued high performance and efficient filtration.

The filter is also designed to improve the efficiency of the refrigerator's ice maker, providing consistently clear and fresh-tasting ice. This is particularly beneficial for those who frequently use ice in beverages, ensuring that the ice does not alter the taste of drinks through contamination.

In terms of compatibility, the W10206425A filter works with various KitchenAid refrigerator models, making it a reliable choice for many households. It is essential to check your refrigerator model to ensure compatibility before purchasing to avoid any issues during installation.

Moreover, KitchenAid is known for its commitment to quality and longevity. The W10206425A filter is constructed from durable materials designed to last through numerous filtering cycles while maintaining optimal performance.

In summary, the KitchenAid W10206425A water filter is a crucial accessory for any KitchenAid refrigerator, designed to provide superior filtration, ease of use, and compatibility with various models. Its features ensure that your water and ice remain pure and refreshing, making it a wise investment for your kitchen needs. Whether for daily hydration or entertaining, this filter enhances your overall kitchen experience.
Top Page Image Contents