CD Play, Playing a CD | Philips AZ 9235 instruction

Philips AZ 9235 manual CD Play, Playing a CD, Push the Open 2 slider Lid opens

Page 11

CD PLAY

This CD player can play all kinds of Audio Discs such	P
as CD-Recordables and CD-Rewritables. Do not try to
play a CD-ROM, CDi, VCD, DVD or computer CD.
1 Push the OPEN 2 slider.
y The lid opens.
	VO	L.
2 Insert an audio CD, printed side up, by pressing gently	0
2 Insert an audio CD, printed side up, by pressing gently
on the CD centre so that it fits onto the hub.
Close the lid by pressing it down.
3 Press 2; for approximately 1 second to switch the
player on and start CD playback.
y The current track number and the elapsed playing
time are displayed.

•You can pause playback by pressing 2;.

y The time where playback was paused is flashing.

•Continue playback by pressing 2; again.

4Press 9 to stop playback.

y The total number of tracks and the total playing time of the CD are displayed.

OPEN

5Press 9 again to switch the player off.

•To remove the CD, hold it by its edge and press the hub gently while lifting the CD.

Note: If there is no activity, the set will automatically switch off after a while to save energy.

Image 11

Contents

Azaz Exportador País de Origen China Nº de Serie MéxicoEnglish Page Español GuaranteesEnglish FrançaisLocks all buttons CONTROLS, refer to the illustration onQuick Start Batteries supplied or optionally available Power SupplyBattery indication Battery type ESP on ESP offRecharging the ECO-PLUS NiMH batteries on board Rechargeable ECO-PLUS NiMH battery handlingRechargeable ECO-PLUS NiMH batteries AY 3362 only Use your head when using headphones Power SUPPLY/HEADPHONESHeadphones HE Connect the supplied headphones to the Line OUT/p socketPlayer on and start CD playback CD PlayPlaying a CD Push the Open 2 slider Lid opensPlayback information Volume and bassVolume adjustment Bass adjustmentSelecting a track during playback FeaturesSelecting a track when playback is stopped Selecting a track and searchingClearing the program Programming track numbersLocking all buttons Hold Switch the slider to Hold to activate HoldStoring the last position played Resume ESP Scan The first 10 seconds of each Selecting different playing possibilities ModePlayback starts in the chosen mode after 2 seconds Played repeatedly in random orderOptical out not on all versions Remote control not on all versionsPut the CD player on a IN-CAR ConnectionIn-car use connections supplied or optionally available Problem Possible cause Solution TroubleshootingNo sound or ActiveAvoid dropping the set as this may cause damage General InformationCD player and CD handling Environmental information

Related manuals