Troubleshooting, Problem Possible cause Solution

Philips AZ 9235 manual Troubleshooting, Problem Possible cause Solution

Page 20

TROUBLESHOOTING

WARNING

Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee.

Problem	Possible cause	Solution
No power,	Batteries
playback does	Batteries inserted incorrectly	Insert the batteries
not start		correctly.

	Batteries are empty.	Change the batteries.

	Contact pins are dirty.	Clean them with a cloth.

	Mains adapter
	Loose connection	Connect the adapter
		securely.

	In-car use
	Cigarette lighter is not powered	Switch on ignition or insert
	when ignition is off.	batteries.
nF dISC	CD-RW (CD-R) is not recorded	Use FINALIZE on the
indication	properly.	CD recorder to complete
		the recording.
no dISC	The CD is badly	Replace or clean the CD.
indication	scratched or dirty.

	CD is not or incorrectly inserted.	Insert a CD, label upwards.

	The laser lens is steamed up.	Wait until the lens has
		cleared.
HoLd indication	HOLD is activated.	Deactivate HOLD.
and/or no reaction
and/or no reaction	Electrostatic discharge	Disconnect the set from
to controls		power supply or take out
		the batteries for
		a few seconds.

Image 20

Contents

Azaz México Exportador País de Origen China Nº de SerieEnglish Page Guarantees EnglishFrançais EspañolCONTROLS, refer to the illustration on Locks all buttonsQuick Start Power Supply Battery indicationBattery type ESP on ESP off Batteries supplied or optionally availableRecharging the ECO-PLUS NiMH batteries on board Rechargeable ECO-PLUS NiMH battery handlingRechargeable ECO-PLUS NiMH batteries AY 3362 only Power SUPPLY/HEADPHONES Headphones HEConnect the supplied headphones to the Line OUT/p socket Use your head when using headphonesCD Play Playing a CDPush the Open 2 slider Lid opens Player on and start CD playbackVolume and bass Volume adjustmentBass adjustment Playback informationFeatures Selecting a track when playback is stoppedSelecting a track and searching Selecting a track during playbackProgramming track numbers Clearing the programLocking all buttons Hold Switch the slider to Hold to activate HoldStoring the last position played Resume ESP Selecting different playing possibilities Mode Playback starts in the chosen mode after 2 secondsPlayed repeatedly in random order Scan The first 10 seconds of eachRemote control not on all versions Optical out not on all versionsPut the CD player on a IN-CAR ConnectionIn-car use connections supplied or optionally available Troubleshooting Problem Possible cause SolutionActive No sound orGeneral Information CD player and CD handlingEnvironmental information Avoid dropping the set as this may cause damage

Related manuals