Remote control not on all versions | Philips AZ 9235 specs

Philips AZ 9235 manual Remote control not on all versions, Optical out not on all versions

Page 18

Remote control (not on all versions)

Use the AY 3767 cord remote control. The buttons on the remote control have the same functions as the corresponding buttons on the CD player.

1If necessary press 9 once or twice until the set is switched off.

2Firmly connect the remote control to LINE OUT/p and the headphones to the remote control’s socket.

3Turn the volume down with VOL F on the remote control and set VOL E on the CD player to position 8.

You can connect your CD player to digital equipment (e.g. a CD recorder) with a DIGITAL OPTICAL IN/AUX socket.

1Use the mains adapter, switch ESP off and turn down the volume of the appliance that should be connected.

2Connect an optical cable or signal lead to the OPT OUT socket of your CD player and to the DIGITAL OPTICAL IN/AUX socket of the other appliance.

• To adjust volume and sound, use the controls of the connected appliance.

Notes: – For analogue connections use the LINE OUT/p socket.

– Playback via OPT OUT does not work if the player is supplied by batteries.

Image 18

Contents

Azaz México Exportador País de Origen China Nº de SerieEnglish Page Français GuaranteesEnglish EspañolCONTROLS, refer to the illustration on Locks all buttonsQuick Start Battery type ESP on ESP off Power SupplyBattery indication Batteries supplied or optionally availableRechargeable ECO-PLUS NiMH battery handling Rechargeable ECO-PLUS NiMH batteries AY 3362 onlyRecharging the ECO-PLUS NiMH batteries on board Connect the supplied headphones to the Line OUT/p socket Power SUPPLY/HEADPHONESHeadphones HE Use your head when using headphonesPush the Open 2 slider Lid opens CD PlayPlaying a CD Player on and start CD playbackBass adjustment Volume and bassVolume adjustment Playback informationSelecting a track and searching FeaturesSelecting a track when playback is stopped Selecting a track during playbackProgramming track numbers Clearing the programSwitch the slider to Hold to activate Hold Storing the last position played ResumeLocking all buttons Hold ESP Played repeatedly in random order Selecting different playing possibilities ModePlayback starts in the chosen mode after 2 seconds Scan The first 10 seconds of eachRemote control not on all versions Optical out not on all versionsIN-CAR Connection In-car use connections supplied or optionally availablePut the CD player on a Troubleshooting Problem Possible cause SolutionActive No sound orEnvironmental information General InformationCD player and CD handling Avoid dropping the set as this may cause damage

Related manuals