Programming track numbers, Clearing the program

Philips AZ 9235 manual Programming track numbers, Clearing the program

Page 14

Programming track numbers

You can select up to 99 tracks and store them in
memory in a desired sequence. Any track can be stored
more than once.
1 While playback is stopped, select a track with
° or ¤.	PROGRAM
	PROGRAM	MODE
		MODE

y PROGRAM lights up; the track number programmed and P with the total number of stored tracks are displayed.

4Press 2; to start playback of your selected tracks. y PROGRAM is shown and playback starts.

•You can review the program by pressing PROGRAM for more than 2 seconds. y The display shows all stored tracks in sequence.

Notes: – If you press PROGRAM and there is no track selected, SELECt is displayed.

– If you try to store more than 99 tracks, FULL is displayed.

1If necessary, press 9 to stop playback.

2Press 9 to clear the program.

y CLEAr is displayed once, PROGRAM goes off and the program is cleared.

Note: The program will also be cleared if you

–interrupt the power supply or

–open the CD lid,

–or if the set switches off automatically.

Image 14

Contents

Azaz México Exportador País de Origen China Nº de SerieEnglish Page Français GuaranteesEnglish EspañolCONTROLS, refer to the illustration on Locks all buttonsQuick Start Battery type ESP on ESP off Power SupplyBattery indication Batteries supplied or optionally availableRecharging the ECO-PLUS NiMH batteries on board Rechargeable ECO-PLUS NiMH battery handlingRechargeable ECO-PLUS NiMH batteries AY 3362 only Connect the supplied headphones to the Line OUT/p socket Power SUPPLY/HEADPHONESHeadphones HE Use your head when using headphonesPush the Open 2 slider Lid opens CD PlayPlaying a CD Player on and start CD playbackBass adjustment Volume and bassVolume adjustment Playback informationSelecting a track and searching FeaturesSelecting a track when playback is stopped Selecting a track during playbackProgramming track numbers Clearing the programLocking all buttons Hold Switch the slider to Hold to activate HoldStoring the last position played Resume ESP Played repeatedly in random order Selecting different playing possibilities ModePlayback starts in the chosen mode after 2 seconds Scan The first 10 seconds of eachRemote control not on all versions Optical out not on all versionsPut the CD player on a IN-CAR ConnectionIn-car use connections supplied or optionally available Troubleshooting Problem Possible cause SolutionActive No sound orEnvironmental information General InformationCD player and CD handling Avoid dropping the set as this may cause damage

Related manuals