![](/images/new-backgrounds/1012237/1223721x1.webp)
Removing this insert allows you to wash larger items such as large mixing bowls, stock pots, and roasters.
Single rack insert
The single rack insert allows you to wash a number of
2.Push down on insert until handle fits against outer rack edge.
3.When center tab under handle locks in under the middle side rack wire, the insert is in place. (See illustration.)
To install single insert
1.Place the single insert end legs under the 2nd wire from the right as shown below.
IMPORTANT: Make sure the 3 hooks at the back of the insert are installed over the 2nd bottom rack wire from the front of the rack,
To remove double and single inserts
1.Pull handle out to the right and lift up to release.
2. Lift insert out of rack. |
|
|
To install double insert |
| A. 3 insert hooks |
| B. Single insert end legs | |
NOTE: It will be easier to install the inserts if you remove the |
| |
|
| |
silverware basket from the rack. | 2. | Push down on insert until handle fits against outer rack edge. |
|
1.Place the double insert end legs under the 3rd wire from the right as shown below.
IMPORTANT: Make sure that the curved wires, on the bottom of the insert, fit over the wires in the bottom of the rack.
3. When center tab under handle locks in under the middle side rack wire, the insert is in place. (See illustration.)
11