KitchenAid KUDU03FTPA For Model KUDU03ST During the first minute of a cycle, To add items

For Model KUDU03ST

During the first minute of a cycle

1.Open the door.

2.Press a new cycle and/or options.

3.Check the detergent dispensers. They must be filled properly for the new cycle. (See "Detergent Dispenser" in the User Instructions for more details.)

4.Press START/RESUME.

5.Close the door firmly within 3 seconds of pressing Start/ Resume. The dishwasher resumes the new cycle and/or option after a 5-second pause.

After the first minute of a cycle

1.Press CANCEL.

The display shows

II

Your dishwasher starts a 2-minute drain (if needed). Let

the dishwasher drain completely. The light turns off after 2 minutes.

NOTE: If your dishwasher does not need draining, the light turns off.

2.Open the door.

3.Select a new cycle and/or options.

4.Check the detergent dispensers. They must be filled properly for the new cycle. (See "Detergent Dispenser" in the User Instructions for more details.)

5.Press START/RESUME.

6.Close the door firmly. The dishwasher resumes the new cycle and/or option after a 5-second pause.

For Models KUDU03Fr, KUDU03FTPA

During the first minute of a cycle

1.Open the door.

2.Press a new cycle and/or options.

3.Check the detergent dispensers. They must be filled properly for the new cycle. (See "Detergent Dispenser" in the User Instructions for more details.)

4.Press START/RESUME.

5.Close the door firmly within 3 seconds of pressing Start/ Resume. The dishwasher resumes the new cycle and/or option after a 5-second pause.

After the first minute of a cycle

1.Open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door to gain access to the control panel.

2.Press CANCEL. The Cancel light glows.

3.Close the door. Your dishwasher starts a 2-minute drain (if needed). Let the dishwasher drain completely.

4.Open the door. Select a new cycle and/or options.

5.Check the detergent dispensers. They must be filled properly for the new cycle. (See "Detergent Dispenser" in the User Instructions for more details.)

6.Press START/RESUME.

7.Close the door firmly within 3 seconds of pressing Start/ Resume. The dishwasher resumes the new cycle and/or option after a 5-second pause.

/%",,,_,:;,* } 0<!u',,;.......... _}"_......!#ioo, _o;_

You can add an item anytime before the main wash starts. Open the door and check the detergent dispenser. If the cover is still closed, you can add items.

To add items

1.Open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door.

2.Open the door. If the detergent dispenser cover is still closed, add the item.

3.Press START/RESUME.

4.Close the door firmly within 3 seconds of pressing Start/ Resume. The dishwasher resumes the cycle after about a 5-second pause.

You can customize your cycles by pressing the options desired. If you change your mind, press the option again to turn off the option. Select a different option if desired.

You can change an option anytime before the selected option begins. For example, you can press HEAT DRY anytime before drying begins.

Press START/RESUME to repeat the same cycle and options as in the previous wash cycle.

NOTE: If the last cycle you completed was a rinse cycle, when you press Start/Resume, the dishwasher runs the last full wash cycle and options.

PROSCRUB® wash option

Select this option to activate the PROSCRUB® spray jets and provide intensified water spray to the back of the lower level rack. The PROSCRUB® wash option provides a concentrated wash action to pans, casseroles, etc. with tough food soil.

This option may add heat and wash time to the cycle.

NOTE: PROSCRUB® is an option with the Heavy Duty and Normal wash cycles.

IMPORTANT:

•Load pans, casserole dishes, etc. facing the PROSCRUB® spray jets in the back of the lower level rack. Tip items toward the rear of the dish rack to maximize coverage. Only one row of items may face the PROSCRUB® spray jets. Stacking, overlapping, or nesting items will keep the PROSCRUB_ spray jets from reaching all of the surfaces.

•Turn the PROSCRUB® wash option off if not loading items for this option.

/

,

Side view of PROSCRUB® wash area

14