KitchenAid 5KSB555 manual Using the Blender, Gap Gap, Before Use, Operating the Blender

Page 8

Preparing the Blender for Use

English

NOTE: When properly positioned, pitcher assembly will rest completely on Blender base. If not, repeat steps 3 and 4.

No

Gap Gap

7. Put lid on pitcher.

WARNING

Electrical Shock Hazard

Plug into a grounded outlet.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire or electrical shock.

8.Plug power cord into a grounded outlet. Blender is now ready for operation.

9.Before removing the pitcher assembly from the base, always press “O” and unplug the power cord.

Using the Blender

Before Use

NOTE: While the Blender is on or the PULSE ( ) mode indicator light is blinking:

-Do not interfere with blade movement

-Do not remove pitcher lid

Operating the Blender

The KitchenAid™ Blender has five speeds: STIR (), CHOP (), MIX (), PUREE (), and LIQUEFY (). In addition, it also features CRUSH ICE () and PULSE () mode.

1.With convenient one-step operation, this unit will operate only when a speed selection button is pressed.

2.Before operating the Blender, make sure the pitcher is properly secured in the locking collar and assembly is positioned on the Blender base.

6

Image 8
Contents Artisan Blender Model 5KSB555 BlenderTable of Contents Blender Safety Electrical RequirementsImportant Safeguards Blender Features Model 5KSB555 Blender Features Blender Assembly Preparing the Blender for UseBefore First Use Sealing RingUsing the Blender Gap GapBefore Use Operating the BlenderCrush ICE Pulse Mode Ingredient CupSpeed Control Guide ItemSpeedCare and Cleaning To Clean Individual ComponentsTroubleshooting Blender does not operate when a setting is selectedBlender stops while blending Blender turns on, but blades will not rotateBlender Tips Quick TipsBlender Tips Household KitchenAid Blender Warranty Service CentersCustomer Service English