KitchenAid 5KSB555 manual Preparing the Blender for Use, Before First Use, Blender Assembly

Page 7

Preparing the Blender for Use

Before First Use

Before using your Blender for the first time, wipe Blender base with a warm sudsy cloth, then wipe clean with a damp cloth. Dry with a soft cloth. Wash pitcher, lid, locking collar and blade assembly, sealing ring and ingredient cup in warm, sudsy water (see Care and Cleaning, page 10). Rinse parts and wipe dry.

Blender Assembly

1.Put locking collar with blade assembly pointing up on a sturdy surface.

2.Put sealing ring, flat side down, around the blades and into the groove within the locking collar.

Sealing

Ring

3.Align the pitcher tabs with the slots of the locking collar.

4.Press down and rotate pitcher clockwise, approximately ¼ turn until two clicks are heard.

5.Adjust the length of the Blender power cord.

English

6.Put pitcher assembly onto the Blender base.

Locking

Collar

Continued on next page

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model 5KSB555 Blender Artisan BlenderTable of Contents Electrical Requirements Blender SafetyImportant Safeguards Blender Features Model 5KSB555 Blender Features Sealing Ring Blender AssemblyPreparing the Blender for Use Before First UseOperating the Blender Using the BlenderGap Gap Before UseCrush ICE Ingredient Cup Pulse ModeItemSpeed Speed Control GuideTo Clean Individual Components Care and CleaningBlender turns on, but blades will not rotate TroubleshootingBlender does not operate when a setting is selected Blender stops while blendingQuick Tips Blender TipsBlender Tips Service Centers Household KitchenAid Blender WarrantyCustomer Service English
Top Page Image Contents