Radio
Operation
At the front of the CD micro system, or using the remote control, press POWER, to switch the CD micro system on. The LCD display will light up.
Press either TUNER/BAND button on the remote control or the TUNER on the unit to select the radio tuner.
Tuning
Press either TUNER/BAND on the remote control or TUNER/BAND on the unit to select between FM and AM bands.
Use the tuning UP/DOWN button on the remote control or on the unit to select the desired station. The frequency will display on the LCD display.
Pressing any of the tuning buttons briefly will change the frequency by one increment. Pressing and holding the button for a couple of seconds will cause the tuner to search for the next radio station.
Pressing any of the tuning buttons during a search will stop the search.
FM
FM Antenna
Fully extend the FM antenna wire and position it to obtain the best FM reception.
FM Stereo
The CD micro system is capable of receiving stereo FM broadcasts. When you tuned to a stereo broadcast, ‘STEREO’ will be displayed.
AM
AM Loop Antenna
For AM reception broadcasts are picked up through a loop antenna that plugs into the back of the unit.
The antenna assembly has a fixing system attached that can be folded to form either a stand or wall mounting as shown in the figures opposite. The wall mounting has two
7
holes for round head screws. These are not supplied.
Note: It is normal for the position of the antenna to be adjusted to achieve the best reception. If selecting the wall mounted option ensure that you can receive the radio stations you listen to before fixing.
As supplied
Folded to form a
stand
Folded for wall mounting