GB
3)Ducting version:
a)Connect the air vent of the hood to the air vent hole using a flexible hose of 15 cm diameter. Lock the flexible hose with hose clamps (hose and clamps not provided).
b)Make the electrical connection of the hood by means of the power cable (refer to the paragraph “Electrical connection”).
c)Fit the decorative flue resting it on the hood. Lift the upper flue up to the ceiling and secure it by means of the 2 screws (L).
4)Filtering version:
a)Fit the baffle (M) to the upper flue using 4 flat- headed screws (N). Connect a flexible hose of 12.5 cm diameter to the baffle locking it with a hose clamp (hose and clamp not provided).
b)Take the decorative flue and rest it on the hood. Lift the upper flue up to the ceilingand secure it using the 2 screws (L).
c)Lift the lower flue holding it firm with some adhesive tape and connect the flexible hose to the reducer (E) with a hose clamp (not provided).
d)Make the electrical connection of the hood by means of the power cable (refer to the paragraph “Electrical connection”).
e)Lower the lower flue resting it on the hood.
f)Check if the charcoal filter (P) has been installed. If not yet installed, proceed by sliding the 2 filter clips into their seats and turn the filter upwards.
3