Wolfgang Puck Complete Guide to Blender Parts and Mixer Attachments

Assembly and Use

of Hand Blender Attachment

	1	Ensure the motor base is unplugged. Attach
		hand blender rod to motor base by lining up
		the two separate parts. Turn clockwise to lock
		in place. (see figure 1)
	2	Place one of the small metal attachments in the
		shaft of the mixing rod. Make sure that the pin
		located on the shaft fits into the slot of the
		attachment. Press down until attachment locks
figure 1		in place.
		Caution: Blades are sharp. Handle with care.
		Place food in suitable container for mixing
	3
		(beaker, bowl, pan). For best results, solid foods
		should be no larger than 1/4" or 1/2" cubes.
	4	Plug into 120-volt 60 Hz AC only outlet.
	5	Place the hand blender attachment into your
		ingredients. Turn the speed selector to LO first.
		Press the ON/OFF switch to begin blending; then
figure 2		gradually increase speed, as needed. (see figure
		2) Slowly move the blade up, down and sideways
		through the food . Note: Never lift the hand
		blender attachment out of your ingredients while
		the unit is running.

Using the Attachment Blades

To change the metal attachment blade, remove the attachment already inserted on the shaft of the mixing rod with the tool provided. Use the side of the tool with the semi-circular slot to remove the attachment. Place the slot around the shaft, underneath the attachment, and lift up to remove.

Caution: Blades are sharp. Handle with care.

Suggested Uses

To change the metal attachment blade, remove the attachment already inserted on the shaft of the mixing rod with the tool provided. Use the side of the tool with the semi-circular slot to remove the attachment. Place the slot around the shaft, underneath the attachment, and lift up to remove.

Caution: Blades are sharp. Handle with care.

Attachment	Functions	Speed
Aerator disc	Beat cream, whip egg whites,	Minimum
	puddings, sauces, frostings and other
	airy, foamy mixtures. When using, move
	blending rod up and down to draw air
	in. Use a tall, narrow container for best
	results when foaming milk, making
	cream and whipping egg whites.

6	Do not operate the motor continuously for more
	than one minute when using hand blender
	attachment. Allow it to cool off for 3 minutes
	before next use.
7	When you are finished, simply release the
figure 3	ON/OFF switch, unplug the motor base, and
	then unscrew the hand blender rod.
8	To remove blades from the blender rod, use your

Blending disc

Grinding blade

Mix and stir shakes, drinks, omelet batters, sauces and emulsions. Use for pancake batter, gravies and dressings.

Cut, chop, and crush raw or cooked meat and hard vege-tables.Grind cooked meat for use in recipes such as casseroles or chicken salad.

Medium to Maximum

Maximum

blade removal tool as shown in figure 3. Slide

the opening of the tool underneath the blade

and press down.

Multipurpose blade	Chop, crush, and mash vege-tables, and	Medium to
	fruit for baby food, soups and sauces.	Maximum
	Use to crush ice (add water to cubes
	before crushing.)

7 8