Hotpoint FFM90, FFS90, FFA90 manual Keep this Book in a safe place for quick reference

FRIDGE FREEZER - MODELS FFA90, FFS90 & FFM90

INSTRUCTIONS FOR INSTALLATION & USE

GETTING STARTED: To ensure that your fridge freezer runs reliably and efficiently follow these steps.

STEP 1

Choose a location for your fridge freezer, away from any heat sources and allow adequate ventilation - 100mm (4 inch) gap above.

STEP 3

Level the fridge freezer by adjusting the front feet.

This will stop rocking or vibration and keep the door aligned.

NB. The spanner is for illustration only and is not supplied with the fridge freezer.

STEP 2

Move the fridge freezer into position, using the sides of the cabinet.

Take care to avoid damaging the refrigerant circuit pipe work on the rear.

STEP 4

After the front feet have been adjusted and the fridge freezer is level, fit the left and right hand bottom hinge covers supplied. Align with the cover plate slots and push into position.

INSTALLATION	SAFETY &
CONTROLS

STEP 5

Before plugging in and switching on, leave the fridge freezer in its final location for at least 15 minutes to allow it to settle.

USEFUL

STEP 6

Plug in and switch on. Allow the fridge freezer compartments to cool before placing food inside.

All food in the fridge freezer should be covered.

What the display will show as both compartments cool:

Stage 1: Freezer The display will show temperature reading with the freezer High Temperature symbol on.

The freezer High Temperature symbol will stay on until the freezer compartment has cooled to its factory setting (-18˚C).

Stage 2: Freezer The display will show arrow indicating the temperature is cooling down, until -18˚C is reached, the arrow then turns off.

Stage 3: Fridge The display will show temperature reading with arrow indicating the fridge compartment is cooling to its factory setting (4˚C). When 4˚C is reached the arrow turns off.

STEP 7

If you are freezing fresh food, turn on Fast Freeze by pressing the switch 24 hours before placing the food inside.

Place the fresh food inside.

Fast freeze will automatically cancel after 48 hours.

What the display will show as the Freezer compartment cools if Fast Freeze is pressed:

Stage 1:

When Fast Freeze is pressed.

Stage 2:

After 8 seconds the display will show temperature reading with the freezer High Temperature symbol on.

Stage 3:

Freezer compartment is set to Fast Freeze.

The freezer High Temperature symbol has turned off.

ADVICE
MAINTENANCE	CLEANING &
TROUBLESHOOTING
GUARANTEE	SERVICE

NOTE:

See CONTROLS section to find out how to change the display or change compartment temperatures.

STEP 8

Your fridge freezer is now working.

If after 24 hours your fridge freezer is not operating as you want, refer to the Troubleshooting section.

&

Read the rest of these instructions to get the best from your appliance and remember to fill in your guarantee registration.

Keep this Book in a safe place for quick reference.